Sonoff MINIR4M User Manual

5
No matter S1 and S2 are connected or left idle to the external switch, this device can be
controlled by automation or the App.
It is prohibited to connect S1 and S2 terminals to the neutral or ground wire, in order to
avoid damaging the equipment and causing danger.
Make sure all wires are connected correctly.
3. Power on
After powering on, the device will enter the Pairing Mode defaulted during the first use,and the
Network indicator flashes in a cycle of two short and one long.
●
●
●

Sonoff MINIR4M Specifications

General

Brand	Sonoff
Model	MINIR4M
Category	Switch
Language	English