Name: Sony A7 R IV
Brand: Sony
Rating: 4 (1 reviews)

To Next Page

To Previous Page

104

Fn button t (Flash Compensation) t Select the desired

setting

Toward +: Makes the flash level higher.

Toward –: Makes the flash level lower.

Notes

• This item cannot be set when the exposure mode is set to AUTO, AUTO+, Sweep

Panorama, or Scene Selection.

• The higher flash effect may not be visible due to the limited amount of flash light, if

the subject is outside the maximum range of the flash. If the subject is very close, the

lower flash effect may not be visible.

Exposure compensation and flash compensation

Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when

[AUTO] is selected) to perform the compensation.

Flash compensation only changes the amount of flash light.

MENU button t 2 t [Flash control] t Select the desired

setting

ADI: Advanced Distance Integration

TTL: Through the lens

• When [ADI flash] is selected, using a lens that is provided with a distance

encoder feature can perform more accurate flash compensation by using

more accurate distance information.

Selecting the flash control mode to set the amount of flash

light (Flash control)

ADI flash This method controls the lighting of the flash, factoring in the

focus distance information and light metering data from the

pre-flash. This method enables an accurate flash

compensation with virtually no effect from the reflection off

the subject.

Pre-flash TTL This method controls the amount of flash light depending on

the data only from pre-flash light metering. This method is

susceptible to the reflection off the subject.

Other manuals for Sony A7 R IV

Questions and Answers:

Need help?

Do you have a question about the Sony A7 R IV and is the answer not in the manual?

General