SONY:
Wireless
Speaker System
Operating Instructions
AIR-SA10
3-288-619-11(1)
Notice
for
the
customers
in
Canada
For
the
wireless
transceiver
(EZW-RTl
01
This device complies with RSS-Gen
of
IC Rules.
Operation
is
subject to the following two conditions:
(1) this device may
not
cause interference,
and
(2)
this device must accept any interference, including
interference that may cause undesired operation
of
the
device.
This
equipment
complies with
Ie
radiation exposure
limits set forth for uncontrolled equipment and meets
the RSS-102
of
the
IC radio frequency (RF) Exposure
rules.
This
equipment
should be installed and operated with at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feel and
ankles).
Notice
for
the
customers
in
Australia
.•
1_.
S-AIR
DIGITAL
WIRELESS
© 2008 Sony Corporation
Printed in China
http://www.sony.neV
For
the
wireless
transceiver
(EZW-RTlO)
This equipment should be installed
and
operated with
at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feet and
ankles).
WARNING
To
reduce
the
risk
of
fire
or
electric shock,
do
not
expose
this
apparatus
to
rain
or
moisture.
Indoor use only.
To
reduce the risk
of
fire,
do
not cover the ventilation
opening
of
the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources such
as
lighted candles on the apparatus.
To
reduce the risk
of
fire
or
electric shock,
do
not
expose this apparatus to dripping
or
splashing, and
do
not place objects filled with liquids, such
as
vases,
on
the
apparatus.
As
the main plug
is
used to disconnect the unit from
the mains. connect the unit to an easily accessible
AC oullet. Should you notice an abnormality in the
unit, disconnect the main plug from the
AC
outlet
immediately.
The unit is not disconnected from the mains
as
long
as
it
is
connected to the
AC
outlet, even
if
the unit itself has
been turned off.
Do not install the appliance in a confined space, such as
a bookcase
or
built-in cabinet.
The nameplate
is
located on the bottom exterior.
Notice
for
the
customers
in
the
U.S.A.
The following indications are located
on
the
bottom
exterior.
&
This symbol
is
intended to alert the
~
user to the presence
of
uninsulated
"dangerous voltage" within the
product's enclosure that may be
of
sufficient magnitude to constitute a
risk
of
electric shock to persons.
This symbol
is
intended to alert the
user to the presence
of
important
operating
and
maintenance (serVicing)
instructions in the literature
accompanying the appliance.
Owner's Record
The model and serial numbers are located on the
bottom
of
the unit. Record these numbers in the space
provided below. Refer to
them
whenever you call
upon
your Sony dealer regarding this product.
~~i~~I~~.
---
Important
Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3)
Heed all warnings.
4) Follow all instructions.
5)
Do not use this apparatus near water.
6) Clean only with
dry
cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do
not
install near any heat sources such as
radiators, heat registers, stoves,
or
other
apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety
purpose
of
the polarized
or
grounding-type plug. A polarized plug has two
blades with
one
wider
than
the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade
or
the third prong are
provided for your safety. Ifthe provided plug does
not
fit
into your outlet, consult an electrician for
replacement
of
the obsolete outlet.
10)
Protect the power cord from being walked on
or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
I I)Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand,
tripod, bracket,
or
table specified
by the manufacturer,
or
sold with
the apparatus.
When
a cart
is
used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13)Unplug this apparatus
during
lightning storms
or
when unused for long periods
of
time.
14) Refer all servicing to qualified service personnel.
Servicing
is
required when the apparatus has been
damaged in any
way,
such as power-supply cord
or
plug
is
damaged, liquid has been spilled
or
objects
have fallen into the apparatus, the apparatus has
been exposed
to
rain
or
moisture, docs not operate
normally,
or
has been dropped.
The
following
FCC
statement
applies
only
to
the
version
of
this
model
manufactured
for
sale
in
the
U.S.A.
Other
versions
may
not
comply
with
FCC
technical
regulations.
NOTE:
'Inis equipment has
been
tesled and found to comply
with
the
limits for a Class B digital device, pursuant
to Part
15
of
the FCC Rules. These limits are deSigned
to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and,
if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there
is
no
guarantee that
interference will not
occur
in a particular installation.
Ifthis equipment does cause
harmful
interference to
radio
or
television reception, which can be determined
by
turning
the equipment
off
and
on,
the user
is
encouraged to try to correct the interference by
one
or
more
of
the following measures:
- Reorient
or
relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-
Connect
the
equipment into an outlet
on
a
circuit different from that to which the receiver
is
connected.
- Consult the dealer
or
an experienced
radio/TV
technician for help.
CAUTION
You
arc cautioned that any changes
or
modifications
not expressly approved in this manual could void your
authority to operate this equipment.
For
the
wireless
transceiver
(EZW-RTl 0)
This device complies with Part
15
of
the FCC Rules.
Operation
is
subject 10 the following two conditions:
(I)
this device may
not
cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment must
not
be co-located
or
operated in
conjunction with any
other
antenna
or
transmitter.
'Inis equipment complies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65.
This equipment should be installed and operated with at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feet and
ankles).
• "S-AIR"
and
its logo are trademarks
of
Sony
Corporation.
• The Bluetooth word
mark
and logos are owned
by the Bluetooth SIG, Inc.
and
any use
of
such
marks
by
Sony
Corporation
is
under
license.
Other
trademarks and lrade names are those
of
their
respective owners.
SONY:
Wireless
Speaker System
Operating Instructions
AIR-SA10
3-288-619-11(1)
Notice
for
the
customers
in
Canada
For
the
wireless
transceiver
(EZW-RTl
01
This device complies with RSS-Gen
of
IC Rules.
Operation
is
subject to the following two conditions:
(1) this device may
not
cause interference,
and
(2)
this device must accept any interference, including
interference that may cause undesired operation
of
the
device.
This
equipment
complies with
Ie
radiation exposure
limits set forth for uncontrolled equipment and meets
the RSS-102
of
the
IC radio frequency (RF) Exposure
rules.
This
equipment
should be installed and operated with at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feel and
ankles).
Notice
for
the
customers
in
Australia
.•
1_.
S-AIR
DIGITAL
WIRELESS
© 2008 Sony Corporation
Printed in China
http://www.sony.neV
For
the
wireless
transceiver
(EZW-RTlO)
This equipment should be installed
and
operated with
at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feet and
ankles).
WARNING
To
reduce
the
risk
of
fire
or
electric shock,
do
not
expose
this
apparatus
to
rain
or
moisture.
Indoor use only.
To
reduce the risk
of
fire,
do
not cover the ventilation
opening
of
the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked flame sources such
as
lighted candles on the apparatus.
To
reduce the risk
of
fire
or
electric shock,
do
not
expose this apparatus to dripping
or
splashing, and
do
not place objects filled with liquids, such
as
vases,
on
the
apparatus.
As
the main plug
is
used to disconnect the unit from
the mains. connect the unit to an easily accessible
AC oullet. Should you notice an abnormality in the
unit, disconnect the main plug from the
AC
outlet
immediately.
The unit is not disconnected from the mains
as
long
as
it
is
connected to the
AC
outlet, even
if
the unit itself has
been turned off.
Do not install the appliance in a confined space, such as
a bookcase
or
built-in cabinet.
The nameplate
is
located on the bottom exterior.
Notice
for
the
customers
in
the
U.S.A.
The following indications are located
on
the
bottom
exterior.
&
This symbol
is
intended to alert the
~
user to the presence
of
uninsulated
"dangerous voltage" within the
product's enclosure that may be
of
sufficient magnitude to constitute a
risk
of
electric shock to persons.
This symbol
is
intended to alert the
user to the presence
of
important
operating
and
maintenance (serVicing)
instructions in the literature
accompanying the appliance.
Owner's Record
The model and serial numbers are located on the
bottom
of
the unit. Record these numbers in the space
provided below. Refer to
them
whenever you call
upon
your Sony dealer regarding this product.
~~i~~I~~.
---
Important
Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3)
Heed all warnings.
4) Follow all instructions.
5)
Do not use this apparatus near water.
6) Clean only with
dry
cloth.
7)
Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do
not
install near any heat sources such as
radiators, heat registers, stoves,
or
other
apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety
purpose
of
the polarized
or
grounding-type plug. A polarized plug has two
blades with
one
wider
than
the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade
or
the third prong are
provided for your safety. Ifthe provided plug does
not
fit
into your outlet, consult an electrician for
replacement
of
the obsolete outlet.
10)
Protect the power cord from being walked on
or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
I I)Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand,
tripod, bracket,
or
table specified
by the manufacturer,
or
sold with
the apparatus.
When
a cart
is
used,
use caution when moving the
cart/apparatus combination to avoid
injury from tip-over.
13)Unplug this apparatus
during
lightning storms
or
when unused for long periods
of
time.
14) Refer all servicing to qualified service personnel.
Servicing
is
required when the apparatus has been
damaged in any
way,
such as power-supply cord
or
plug
is
damaged, liquid has been spilled
or
objects
have fallen into the apparatus, the apparatus has
been exposed
to
rain
or
moisture, docs not operate
normally,
or
has been dropped.
The
following
FCC
statement
applies
only
to
the
version
of
this
model
manufactured
for
sale
in
the
U.S.A.
Other
versions
may
not
comply
with
FCC
technical
regulations.
NOTE:
'Inis equipment has
been
tesled and found to comply
with
the
limits for a Class B digital device, pursuant
to Part
15
of
the FCC Rules. These limits are deSigned
to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and,
if
not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there
is
no
guarantee that
interference will not
occur
in a particular installation.
Ifthis equipment does cause
harmful
interference to
radio
or
television reception, which can be determined
by
turning
the equipment
off
and
on,
the user
is
encouraged to try to correct the interference by
one
or
more
of
the following measures:
- Reorient
or
relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
-
Connect
the
equipment into an outlet
on
a
circuit different from that to which the receiver
is
connected.
- Consult the dealer
or
an experienced
radio/TV
technician for help.
CAUTION
You
arc cautioned that any changes
or
modifications
not expressly approved in this manual could void your
authority to operate this equipment.
For
the
wireless
transceiver
(EZW-RTl 0)
This device complies with Part
15
of
the FCC Rules.
Operation
is
subject 10 the following two conditions:
(I)
this device may
not
cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment must
not
be co-located
or
operated in
conjunction with any
other
antenna
or
transmitter.
'Inis equipment complies with FCC radiation exposure
limits set forth for uncontrolled equipment and meets
the FCC radio frequency (RF) Exposure Guidelines in
Supplement C to OET65.
This equipment should be installed and operated with at
least 20cm
and
more
between the radiator and person's
body (excluding extremities: hands, wrists, feet and
ankles).
• "S-AIR"
and
its logo are trademarks
of
Sony
Corporation.
• The Bluetooth word
mark
and logos are owned
by the Bluetooth SIG, Inc.
and
any use
of
such
marks
by
Sony
Corporation
is
under
license.
Other
trademarks and lrade names are those
of
their
respective owners.
To Next Page
Need help?
Amplifier Specifications
