61
Using the Setup screen
For details on the operation
1
page 56
Selects the anti-blur mode.
• When shooting movies, [Continuous] is activated even if you select [Shooting].
• You can turn off the anti-blur function using the (STEADY SHOT) button when the mode dial is not
set to . (t step 5 in “Read This First”)
• The anti-blur function may not work properly in the following cases.
– When camera shake is too strong
– When the shutter speed is slow, for example, shooting night scenes
Sets for achieving appropriate focus when attaching a conversion lens (not supplied). Attach
the supplied adaptor ring, then attach a conversion lens.
• When using the built-in flash, the flash light may be blocked, causing the shadow to appear.
• The available zoom area is limited.
• The available focusing area is limited.
• For details, see the operating instructions supplied with your conversion lens.
STEADY SHOT
Shooting
Activates the anti-blur function when pressing the shutter
button halfway down.
Continuous
Always activates the anti-blur function. You can stabilize
images even when zooming up a far subject.
• Battery consumption is faster than in [Shooting] mode.
Conversion Lens
Close-up ( )
Attaches a close-up lens.
Tele ( )
Attaches a tele conversion lens.
Wide ( )
Attaches a wide conversion lens.
Off
Does not attach a lens.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
Need help?
General
