DFS-700/P
DME Switcher
DME Switcher
DFS
-
700/700
P
NTSC/PAL
Endless Imagination & Creativity
Endless Imagination & Creativity
Powerful Digital Performance
at Your Fingertips!
What happens when you put outstanding digital effects and an advanced digital
switcher together in an extremely compact package? You get the Sony DFS-700/P*—
an ideally proportioned, easy-to-operate switcher incorporating the latest digital
multi effects. Offering the precision of full component digital processing, all the
creativity of hundreds of preset special effects, and the flexibility of 16:9 or 4:3
operation, the DFS-700/P is your promise of top-flight productivity. Cost-effective
yet extremely versatile, Sony’s DFS-700/P will open up new horizons in digital tel-
evision performance.
* The DFS-700/P refers to two models: the DFS-700 (NTSC model) and the DFS-700P (PAL model).
■ BKDF-702/P
With the BKDF-702/P, the following 4 inputs (composite or S-Video) can be added to
the standard 8 inputs of the DFS-700/P, making the total number of inputs 12. During
use, any 8 of the 12 inputs can be assigned to the control panel.
General
Model DFS-700 (NTSC)/DFS-700P (PAL)
Power requirements AC 100/120 V, 50/60 Hz (DFS-700)
AC 220/240 V, 50/60 Hz (DFS-700P)
Operating voltage AC 90 to 130 V, 47 to 63 Hz (DFS-700)
AC 180 to 260 V, 47 to 63 Hz (DFS-700P)
Power consumption 200 W
Operating temperature 0 to 40 °C (32 to 104 °F)
Dimensions Control panel: 440
✕ 121 ✕ 287 mm
(W
✕ H ✕ D) 17
1
/4 ✕ 4
3
/4 ✕ 11
1
/4 inches
Processor unit: 440
✕ 132 ✕ 520 mm
17
1
/4 ✕ 5
1
/4 ✕ 20
1
/2 inches
Weight Control panel: 3 kg, 6 lb 10 oz
Processor unit: 14 kg, 30 lb 14 oz
Input Signals
VIDEO INPUTS
SDI BNC type
✕ 4
270 Mb/s
Component BNC type
✕ 4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω (DFS-700P)
DSK KEY IN BNC type ✕ 2, Loop-through, 1.0 Vp-p, 75 Ω
REF VIDEO BNC type
✕ 2, Loop-through connection
Sync: 0.286 Vp-p (DFS-700)
Sync: 0.3 Vp-p (DFS-700P)
Burst: 0.286 Vp-p (DFS-700)
Burst: 0.3 Vp-p (DFS-700P)
Output Signals
PGM OUT
SDI BNC type
✕ 2
270 Mb/s
Component BNC type
✕ 2 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω (DFS-700P)
Composite BNC type
✕ 2
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type
✕ 2 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω (DFS-700)
C: 0.3 Vp-p at burst, 75 Ω (DFS-700P)
CLEAN OUT BNC type
✕ 1
SDI: 270 Mb/s
PREVIEW OUT BNC type
✕ 1, Composite
Video: 1.0 Vp-p, 75 Ω, Sync negative
BLACK BURST OUT BNC type
✕ 3
Sync: 0.286 Vp-p, 75 Ω (DFS-700)
Sync: 0.3 Vp-p, 75 Ω (DFS-700P)
Burst: 0.286 Vp-p, 75 Ω (DFS-700)
Burst: 0.3 Vp-p, 75 Ω (DFS-700P)
Signal Processing
Sampling rate Y: 13.5 MHz
R-Y/B-Y: 6.75 MHz
Quantization Y/R-Y/B-Y: 8 bits
Linearity (Composite output) DG: Less than 3.5% (composite input)
Less than 2% (component, S-Video input)
DP: Less than 2.5° (composite input)
Less than 1° (component, S-Video input)
Frequency response 0 to 5 MHz +0.5 dB/-1 dB
S/N More than 50 dB (composite)
More than 55 dB (component, S-Video)
Y/C delay Less than 20 ns (component)
Less than 50 ns (composite, S-Video)
Control Signals
Editor D-sub 9 pin ✕ 1, RS-422A
GPI/T BNC type ✕ 2, TTL Level
Panel D-sub 25-pin ✕ 1
Tally D-sub 25-pin ✕ 1, Relay contact outputs ✕ 8
Terminal USB B-type
Optional Accessories
BKDF-701 Digital/Analog Input Board for NTSC/PAL
BKDF-702 Analog Composite Input Board for NTSC
BKDF-702P Analog Composite Input Board for PAL
BKDF-711 2
nd
Channel DME Board
BKDF-712 3D Video Mapping Effects Board
BZDF-701 DME-LINK Software
BZDF-710 Add-on Effects Software
Input Signals
SDI BNC type
✕ 4
270 Mb/s
Component BNC type
✕ 4 (Y/R-Y/B-Y)
Y: 1.0 Vp-p, 75 Ω, Sync negative
R-Y/B-Y: 0.7 Vp-p, 75 Ω (with DFS-700)
R-Y/B-Y: 0.525 Vp-p, 75 Ω (with DFS-700P)
Input Signals
Composite BNC type ✕ 4
Video: 1.0 Vp-p, 75 Ω, Sync negative
S-Video DIN type
✕ 4 (Y/C)
Y: 1.0 Vp-p, 75 Ω, Sync negative
C: 0.286 Vp-p at burst, 75 Ω (BKDF-702)
C: 0.3 Vp-p at burst, 75 Ω (BKDF-702P)
■ BKDF-701
With the BKDF-701, the following 8 inputs can be added to the standard 8 inputs of
the DFS-700/P, making the total number of inputs 16. During use, any 8 of the 16
inputs can be assigned to the control panel.
Specifications
Processor Unit: Rear Panel
Processor unit
Control panel
Product Configuration
Processor unit, Control panel, D-sub 25-pin control cable (10 m), AC cord,
Instruction manual
■ BKDF-711
The BKDF-711 adds a second Title Key.
Printed in USA 10/00
BC-00828-A
MK7410V5SMC00SEP
Distributed by
Sony Electronics Inc.
One Sony Drive
Park Ridge, NJ 07656
www.sony.com/professional
© 2000 Sony Corporation. All rights reserved.
Reproduction in whole or in part without the written permission of Sony is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, Betacam, Betacam SX, Digital SPARKLE, DME LINK, Duality and MPEG IMX are trademarks of Sony.
To Next Page
Need help?
General
