Sony DSC-F828 User Manual

106
Installing the USB driver
When using Windows XP, you need not
install the USB driver.
Once the USB driver is installed, you need
not install the USB driver.
a Turn on your computer, and
insert the supplied CD-ROM
into the CD-ROM drive.
The model selection screen appears. If
it does not appear, double-click
(My Computer) t (ImageMixer)
in that order.
b Click [Cyber-shot] on the
model selection screen.
The installation menu screen appears.
c Click [USB Driver] on the title
screen.
The “InstallShield Wizard” screen
appears.
d Click [Next]. When the
“Information” screen appears,
click [Next].
The USB driver installation starts.
When the installation is completed, the
screen informs you of completion.
e Click [Yes, I want to restart my
computer now], then click
[Finish].
Your computer restarts. Then, you can
establish USB connection.
Do not connect your camera to
your computer at this time.

Sony DSC-F828 Specifications

General

Sensor Type	CCD
Sensor Size	2/3 inch
Effective Pixels	8.0 megapixels
Lens	Carl Zeiss Vario-Sonnar T*
Optical Zoom	7x
Digital Zoom	2x
Shutter Speed	30 - 1/3200 sec
LCD Screen Size	1.8 inches
LCD Screen Resolution	134, 000 pixels
Viewfinder	Electronic
Dimensions	134 x 91 x 156 mm
Weight	906 g (including battery)
Image stabilization	No
Release date	2003
Focal Length	7.1 - 51 mm (35mm equivalent: 28 - 200 mm)
Maximum Aperture	f/2.0-2.8
Storage Media	CompactFlash, Memory Stick
Battery Type	NP-FM50 InfoLithium
ISO Sensitivity	100, 200, 400