Sony HMZ-T2 Startup Guide

HMZ-T2 4-439-021-11(1)
Continued in
2 Wear
Connect the AC
power cord (mains
lead) and plug it in.
AC power cord
(mains lead)
(supplied)
To wall outlet
Turn the system on ().
The power indicator on the processor unit is now
lit in green.
”PlayStation” is a registered trademark of Sony Computer Entertainment
Inc. Also, ”PS3” is a trademark of the same company.
What’s in the box
AC power cord
(mains lead)
Accessories
DocumentationHead mounted unit Processor unit Headphones HDMI cable
4-439-021-11(1)
1 Connect
© 2012 Sony Corporation Printed in Japan
Head Mounted Display
Startup Guide
HMZ-T2
Before use, also refer to “Health Precautions” and “Precautions” in the
“Reference Guide.”
Connect playback equipment and a TV. Connect the supplied headphones.
Connect the head
mounted unit.
Head mounted
unit
Processor unit (Front)
Turn the playback equipment on ().
If your playback equipment has only one HDMI OUT
jack, you can still watch video from the playback
equipment on the television by connecting the
television to the processor unit with a High-Speed
HDMI cable. In this case, set “HDMI pass-through” in
“General Setup” to “On.”
Note
 HDMI pass-through does not enable
simultaneous video playback on the head
mounted unit and TV.
Playback
Equipment
Processor unit (Back)
TV
HDMI
IN
Blu-ray Disc
TM
player
Game console
HDMI
OUT
HDMI cable (supplied)
Resolving lack of audio,
video, or 3D playback from a
PlayStation
®
3 (PS3™)
Audio and video issues may occur when changing the output of the
PS3™ with either following method.
 Changed the output to this system using the system’s HDMI pass-
through function.
 Changed the output to this system, connecting PS3™ and this
system directly, after using PS3™ with TV.
In this case, while the system is on, turn o the PS3™, and then hold
the PS3™ power button for at least 5 seconds (until you hear another
beep) to restart it.
Insert the stereo
mini-plug of the
headphones fully into
the headphone jack.
Pass the right cord
behind the tab.
Pass the left cord
behind the tab.
Fit the right cord into the groove. (Tucking
the cord under the tabs in several places
will help keep the cord in place.)
Tip
 If you prefer, you can connect your
own stereo mini-plug headphones
instead.

Sony HMZ-T2 Specifications

General

Quantity per pack	1 pc(s)
Product color	Black, White

Weight and Dimensions

Weight	330 g
Dimensions (WxDxH)	210 x 110 x 196 mm