© 2020 Sony Corporation Printed in China
Home Theatre System
Startup Guide
HT-S20R 5-010-728-11(1)
1
Deciding the installation position
Bar speaker
Subwoofer
To mount the bar speaker and the surround speakers
on a wall
For details, refer to the Operating Instructions (separate
document).
Note
• Disconnect the AC power cords (mains leads) of the TV and devices from the AC outlets (mains) in advance. The AC power cords must be reconnected in step 4.
• Place the subwoofer 5 cm or more away from a TV rack, walls, etc.
• Check the labels on the bottom of the each surround speaker to identify “SUR L” (left) and “SUR R” (right).
2
Connecting the speakers
Gray (from SUR R)
Blue (from SUR L)
Subwoofer
Bar speaker
SUR R
SUR L
Green
Red
White
Note
• Connect the speaker cords to the matching color of the SPEAKERS jacks on the rear panel of the subwoofer.
What’s in the box
Bar speaker (1) Subwoofer (1) Surround speaker (2)
Remote control (1) /
R03 (size AAA) battery (2)
AC power cord (mains lead) (2) Optical digital cable (1)
WALL MOUNT TEMPLATE (1) Operating Instructions Startup Guide
(this document)
To set up the remote control
3
Connecting with a TV
Are there any HDMI IN jacks on your TV?
Blu-ray Disc™
player, cable box or
satellite box, etc.
: Audio signal
Optical digital
cable
(supplied)*
or
Stereo Mini
cable
(not
supplied)*
NO
Blu-ray Disc™
player, cable box
or satellite box,
etc.
HDMI cable
(not supplied)
: Video signal
: Audio signal
Labeled “ARC” Not labeled “ARC”
Optical digital cable
(supplied)*
Blu-ray Disc™
player, cable box
or satellite box,
etc.
: Video signal
: Audio signal
HDMI cable
(not supplied)
YES
* If your TV does not support the ARC (Audio Return Channel) function, connect an optical digital cable (supplied) or a stereo mini cable (not supplied) to listen to the TV sound.
4
Turning on the system
HELLO TV
Front panel display
AC power cord
(mains lead) (supplied)
Power ON
Turn on the TV.
Connect the AC power cord (mains lead) (supplied) to the subwoofer, then connect the AC power cord (mains lead) (supplied) to the AC outlet (mains).
The front panel display on the subwoofer lights up.
The remote control of the system does not work until [HELLO] in the front panel display on the subwoofer disappears.
Press
(power) on the remote control of the system.
[TV] appears in the front panel display on the subwoofer.
5
Listening to a TV
TV ANALOG
+/–
SW
+/–
INPUT
/
Press INPUT to select the proper input source according to the cable connecting with a TV.
Input sources to be selected
• [TV]: Select this when using an HDMI cable or an optical digital cable to connect with a TV.
• [ANALOG]: Select this when using a stereo mini cable to connect with a TV.
Select the program you want using the TV remote control.
Press +/– to adjust the system volume and press SW +/– to adjust the subwoofer volume.
Note
• Depending on the order in which you turn on the TV and the system, the system may enter muting mode. In this case, turn on the TV first, then the system.
GB
FR
To Next Page
Need help?
General
Weight and Dimensions
