2 OPTIONAL EQUIPMENTS
i. Screwdriver (e.g., #0 Phillips Screwdriver).
ii. Parts Tray for loose screws and small items.
iii. Flashlight.
iv. Service Manual
For Surface Mounted Parts / Connector
Hot-Air type soldering iron is needed
1 LIST OF ITEMS TO BRING
i. Screwdriver (e.g., #2 Phillips Screwdriver).
ii. Multimeter.
iii. ESD Wrist Straps.
iv. Metal Washer (Flat) or Coin - to remove Rear Cover.
v. Ruler - to remove Rear Cover.
vi. Service Manual
Thickness: approx. 1.5 mm
Diameter: 20~25 mm (wrap in tape (L=50 mm))
Plastic or Metal Ruler (In case of Metal ruler,
wrap in tape (L=50 mm) for prevent scratches)
TOOLS & EQUIPMENTS
3
To Next Page
Loading...
Need help?
General
