Wireless Speaker
LF-S50G
Operating Instructions
LF-S50G_UC (GB)_4-727-167-14(1)
Setup How to use
1
Connect the AC adaptor. Talk to your Google Assistant. Touch-free Gesture Control Volume Operations
2
Install the Google Home app.
3
Set up Wi-Fi with App.
Install the Google Home app on a smartphone/iPhone. Follow the directions in the app to set up your speaker with Wi-Fi.
Set the speaker to the smartphone/iPhone's same Wi-Fi connection.
• Depending on your service, you may have to create an account in advance.
Sure, here's some
music on
Google Play Music
Ok Google,
Play some music
*
1
Next
Pass over left to right
Previous
Pass over right to left
Start your request
Pass over far to near*
2
Play / Pause
Pass over near to far
*
2
To cancel the request, pass over from near to far.
Volume down
Circle over counterclockwise
Volume up
Circle over clockwise
The lit area of the LED shifts
as the volume
increases or decreases.
Indicates a volume level in the
range from 0 to 100%.
The volume increases/decreases
in increments of some percentage.*
3
Circle within this area.
Mic
*
3
To fine-tune the volume
Say a voice command to set the volume
to your desired level.
*
1
Refer to the conversation leaflet “Voice Commands” (supplied) or visit the following website for
the latest voice commands;
assistant.google.com/intl/en_us/discover/ (USA)
assistant.google.com/intl/en_uk/discover/ (United Kingdom)
assistant.google.com/intl/en_ca/discover/ (Canada)
assistant.google.com/intl/en_au/discover/ (Australia)
Google, Android™, Google Play, Google Home, Chromecast Built-in
and other marks and logos are trademarks of Google Inc.
To Next Page
Need help?
General
