Selecting the Menu Language
14
2 If LATIN AMERICA is selected:
4 If ASIA EXCEPT JAPAN is selected:
Customers who will use this unit in the shaded
areas shown in the map below should select NTSC
AREA.
Other customers should select PAL AREA.
3
Press the M or m button to narrow the area further
and then press the , or ENTER button.
The SELECT SETTING screen disappears and the
menu item settings suitable for the selected area are
applied.
Note
When you have selected the wrong area, set the
following items using the menu.
• COLOR TEMP (on page 17)
• COMPONENT LEVEL (on page 18)
• NTSC SETUP (on page 18)
See “The default setting values for each area” (page 13)
on the setting value.
Selecting the Menu
Language
You can select one of seven languages (English, French,
German, Spanish, Italian, Japanese, Chinese) for
displaying the menu and other on-screen displays.
“ENGLISH (English)” is selected in the default setting.
The current settings are displayed in place of the x
marks on the illustrations of the menu screen.
1
Press the 1 (standby) switch to turn on the unit.
2
Press the MENU button.
The menu appears.
The menu presently selected is shown in yellow.
3
Press the M or m button to select SYSTEM
SETTING of the USER CONFIG (User
Configuration) menu, then press the , or ENTER
button.
L A T I N A M E R I C A
P A L & P A L - N _ A R E A
A R G E N T I N A
P A R A G U A Y
U R U G U A Y
N T S C & P A L - M A R E A
O T H E R A R E A
PAL&PAL-N area
Argentina
Paraguay
Uruguay
NTSC&PAL-M area
Other area
A S I A E X C E P T J A P A N
N T S C _ A R E A
P A L A R E A
NTSC area
PAL area
RESET
MENU
VOLUME
KEY
INHIBIT
ENTER
1
1
3~5 2 1
CONTROL
CONTRAST: xx
BRIGHTNESS: xx
CHROMA: xx
PHASE: xx
APERTURE: x
BACKLIGHT: x
USER CONTROL
To Next Page
Loading...
Need help?
General
