Troubleshooting
21
•SDI
If you use the PARALLEL REMOTE function, you
need to connect cables.
For more details, see page 23.
KEY INHIBIT menu
You can lock the setting so that they cannot be changed
by an unauthorized user.
Select OFF or ON.
If you set to ON, all items are displayed in black,
indicating the items are locked.
Troubleshooting
This section may help you isolate the cause of a problem
and as a result, eliminate the need to contact technical
support.
• The display is colored in green or purple t Select
the correct input from the RGB/COMP SEL setting in
the USER CONFIG menu (page 18).
• The unit cannot be operated t The key protection
function works. Set the KEY INHIBIT setting to OFF
in the KEY INHIBIT menu.
KEY INHIBIT: xx
KEY INHIBIT
To Next Page
Loading...
Need help?
General
