Back Back to Top Print
Wireless Stereo Headset
MDR-AS800BT
Making a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the BLUETOOTH profile HFP
(Hands-free Profile) or HSP (Headset Profile), via a BLUETOOTH connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
Operations may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with your smartphone or mobile phone.
1. Connect the headset to a smartphone or mobile phone beforehand.
2. Operate your smartphone or mobile phone to make a call.
When you make a call, the dial tone is heard from the headset.
If you make a call while you are listening to music, playback pauses.
If no dial tone is heard via the headset, switch the call device to the headset using your smartphone or mobile
phone or by holding the multi-function button down for about 2 seconds.
3. Press the multi-function button to adjust the volume.
Increase volume: Press the multi-function button 2 times consecutively, holding the button down at the second
push ( ).
Decrease volume: Press the multi-function button 3 times consecutively, holding the button down at the third
push ( ).
4. To end the call, press the multi-function button on the headset again.
If you make a call while you are listening to music, playback will resume when the call ends.
Help Guide
How to Use
To Next Page
Loading...
Need help?
General
Weight and Dimensions
