EasyManuals Logo

Sony MDR-ZX750BN Reference Guide

Sony MDR-ZX750BN
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
English
WARNING
To reduce the risk of electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
Do not expose the batteries (battery pack or batteries installed) to excessive
heat such as sunshine, fire or the like for a long time.
The BLUETOOTH word mark and logos are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the
United States and in other countries.
Microsoft, Windows and Windows Vista are registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other
countries.
Macintosh and Mac OS are trademarks of Apple Inc., registered in the U.S. and
other countries.
The aptX
®
mark and the aptX logo are trade marks of CSR plc or one of its
group companies and may be registered in one or more jurisdictions.
Other trademarks and trade names are those of their respective owners.
Precautions
On BLUETOOTH communication
ˎ
BLUETOOTH wireless technology operates within a range of about 10 meters.
Maximum communication range may vary depending on obstacles (human
body, metal, wall, etc.) or electromagnetic environment.
ˎ
The antenna is built into the unit as illustrated in the dotted line. The
sensitivity of the BLUETOOTH communication will improve by turning the
direction of the built-in antenna to the connected BLUETOOTH device. The
communication distance shortens when the obstacles are between the
antenna of the connected device and this unit.
Location of
built-in
antenna
ˎ
The following conditions may affect the sensitivity of BLUETOOTH
communication.
ē There is an obstacle such as a human body, metal, or wall between this
unit and BLUETOOTH device.
ē A device using 2.4 GHz frequency, such as a wireless LAN device, cordless
telephone, or microwave oven, is in use near this unit.
ˎ
Because BLUETOOTH devices and wireless LAN (IEEE802.11b/g) use the same
frequency, microwave interference may occur and resulting in
communication speed deterioration, noise, or invalid connection if this unit
is used near a wireless LAN device. In such a case, perform the following.
ē Use this unit at least 10 m away from the wireless LAN device.
ē If this unit is used within 10 m of a wireless LAN device, turn off the
wireless LAN device.
ē Install this unit and BLUETOOTH device as near to each other as possible.
ˎ
Microwaves emitting from a BLUETOOTH device may affect the operation of
electronic medical devices. Turn off this unit and other BLUETOOTH devices
in the following locations, as it may cause an accident:
ē where inflammable gas is present, in a hospital, train, airplane, or a petrol
station
ē near automatic doors or a fire alarm
ˎ
This unit supports security capabilities that comply with the BLUETOOTH
standard to provide a secure connection when the BLUETOOTH wireless
technology is used, but security may not be enough depending on the
setting. Be careful when communicating using BLUETOOTH wireless
technology.
ˎ
We do not take any responsibility for the leakage of information during
BLUETOOTH communication.
ˎ
Connection with all BLUETOOTH devices cannot be guaranteed.
ē A device featuring BLUETOOTH function is required to conform to the
BLUETOOTH standard specified by Bluetooth SIG, Inc. and be
authenticated.
ē Even if the connected device conforms to the above mentioned
BLUETOOTH standard, some devices may not be connected or work
correctly, depending on the features or specifications of the device.
ē While talking on the phone hands free, noise may occur, depending on the
device or communication environment.
ˎ
Depending on the device to be connected, it may require some time to start
communication.
If you cannot operate the unit
ˎ
Reset the unit.
Insert a small pin, etc., into the hole, and push it until you feel a click. Pairing
information is not deleted.
ˎ
If you are still unable to operate the unit even after the resetting operation
above, initialize the unit as follows.
Turn off the unit by pressing the POWER button for more than 2seconds.
Then, press and hold the POWER button and the
/ button together
for about 7seconds. The indicator (blue) flashes 4times, and the unit is reset
to the factory settings. All pairing information is deleted.
What is noise canceling?
ˎ
The noise canceling circuit actually senses outside noise with built-in
microphones and sends an equal-but-opposite canceling signal to the unit.
ē The noise canceling effect may not be pronounced in a very quiet
environment, or some noise may be heard.
ē The noise canceling effect may vary depending on how you wear the unit.
ē The noise canceling function works for noise in the low frequency band
primarily. Although noise is reduced, it is not canceled completely.
ē When you use the unit in a train or a car, noise may occur depending on
street conditions.
ē Mobile phones may cause interference and noise. Should this occur, locate
the unit further away from the mobile phone.
ē Do not cover the microphones of the headphones (MIC) with your hands.
The noise canceling function may not work properly.
MIC
On charging the unit
ˎ
This unit can be charged using USB only. Personal computer with USB port is
required for charging.
ˎ
This unit cannot be turned on, and the BLUETOOTH function and noise
canceling function cannot be used while charging.
Note on static electricity
ˎ
Static electricity accumulated in the body may cause mild tingling in your
ears. To minimise the effect, wear clothes made from natural materials.
Others
ˎ
Do not place this unit in a place exposed to humidity, dust, soot or steam,
subject to direct sunlight, or in a car waiting at a traffic signal. It may cause a
malfunction.
ˎ
Using the BLUETOOTH device may not function on mobile phones,
depending on radio wave conditions and location where the equipment is
being used.
ˎ
If you experience discomfort after using the BLUETOOTH device, stop using
the BLUETOOTH device immediately. Should any problem persist, consult
your nearest Sony dealer.
ˎ
Listening with this unit at high volume may affect your hearing. For traffic
safety, do not use this unit while driving or cycling.
ˎ
Do not put weight or pressure on this unit as it may cause the unit to deform
during long storage.
ˎ
Do not subject the unit to excessive shock.
ˎ
Clean the unit with a soft dry cloth.
ˎ
Do not expose the unit to water. The unit is not waterproof.
Remember to follow the precautions below.
ē Be careful not to drop the unit into a sink or other container filled with
water.
ē Do not use the unit in humid locations or bad weather, such as in the rain
or snow.
ē Do not get the unit wet.
If you touch the unit with wet hands, or put the unit in a damp article of
clothing, the unit may get wet and this may cause a malfunction of the
unit.
ˎ
The earpads may deteriorate due to longterm storage or use.
ˎ
If you have any questions or problems concerning this unit that are not
covered in this manual, please consult your nearest Sony dealer.
Specifications
General
Communication System: BLUETOOTH Specification version 3.0
Output: BLUETOOTH Specification Power Class 2
Maximum communication range: Line of sight approx. 10 m
1)
Frequency band: 2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method: FHSS
Compatible BLUETOOTH Profiles
2)
:
A2DP (Advanced Audio Distribution Profile)
AVRCP (Audio Video Remote Control Profile)
HFP (Hands-free Profile)
HSP (Headset Profile)
Supported Codec
3)
: SBC
4)
, AAC
5)
, aptX
Supported content protection method: SCMS-T
Transmission range (A2DP): 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
Total Noise Suppression Ratio: Approx. 17dB
6)
Included items:
Wireless noise canceling stereo headset (1)
Micro-USB cable (approx. 50 cm) (1)
Connecting Cord (approx. 1.5 m) (1)
Reference Guide (this sheet) (1)
Quick Start Guide (1)
1)
The actual range will vary depending on factors such as obstacles between
devices, magnetic fields around a microwave oven, static electricity,
reception sensitivity, antenna’s performance, operating system, software
application, etc.
2)
BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and conversion format
4)
Subband Codec
5)
Advanced Audio Coding
6)
Equivalent to approx. 98% reduction of energy of sound compared with not
wearing the unit.
Wireless noise canceling stereo headset
Power source:
DC 3.7 V: Built-in lithium-ion rechargeable battery
DC 5 V : When charged using USB
Mass: Approx. 230 g
Operating temperature: 0 °C to 40 °C
Rated power consumption: 1.5 W
Usage hours:
When connecting via the BLUETOOTH device
Music playback time:
Max. 13 hours (NC ON), Max. 19 hours (NC OFF)
Communication time:
Max. 10 hours (NC ON), Max. 12 hours (NC OFF)
Standby time:
Max. 26 hours (NC ON), Max. 150 hours (NC OFF)
When using the supplied connecting cord
Max. 24 hours (NC ON)
Note: Usage hours may be shorter depending on the Codec and the
conditions of use.
Charging time:
Approx. 2.5 hours
Charging temperature: 5 °C to 35 °C
Receiver
Type: Closed, Dynamic
Driver units: 40 mm
Frequency response:
8 Hz - 22,000 Hz (when using the supplied connecting cord)
Maximum input: 100 mW (when using the supplied connecting cord)
Impedance:
NC ON: 23  (1 kHz) (when using the supplied connecting cord)
NC OFF: 50  (1 kHz) (when using the supplied connecting cord)
Sound pressure sensitivity:
NC ON: 102 dB/mW (when using the supplied connecting cord)
NC OFF: 101 dB/mW (when using the supplied connecting cord)
Microphone
Type: Electret condenser
Direction characteristic: Omni directional
Effective frequency range: 100 Hz - 4,000 Hz
Wireless
Noise Canceling
Stereo Headset
Reference Guide GB
CT
KR
4-479-126-32(1)
繁體中文
警告
為減少觸電的危險,請勿打開裝置外殼。請只委託合格的人員進行維修。
請勿將本系統安放在書櫥或壁櫥等狹窄封閉處。
請勿將電池(安裝的電池組或電池)⾧時間暴露在如陽光或⽕源等類似過熱的地
⽅。
經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變
更頻率、加大功率或變更原設計之特性及功能。
低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,
應立即停用,並改善至無干擾時⽅得繼續使用。前項合法通信,指依電信法規定作
業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射
性電機設備之干擾。
BLUETOOTH字樣與商標為Bluetooth SIG, Inc.所擁有;Sony Corporation針對此類
標示的使用已獲得授權。
N字標示為NFC Forum, Inc.在美國和其他國家的商標或註冊商標。
Microsoft、Windows及Windows Vista是Microsoft Corporation在美國及/或其他
國家的註冊商標或商標。
Macintosh和Mac OS是Apple Inc.在美國及其他國家的註冊商標。
aptX
®
標誌和aptX標識是CSR plc或其集團公司之一的商標,可能在一個或多個管
轄區域中註冊。
其他商標和商標名稱為其各自所有人擁有。
預防措施
關於BLUETOOTH通訊
BLUETOOTH無線技術可在約10 m的範圍內運作。
最大通訊範圍可能依障礙物(人體、金屬、牆面等)或電磁環境不同而定。
天線內建在裝置中,如圖中虛線所示。將內建天線朝連接的BLUETOOTH裝置⽅向
轉動可以增加BLUETOOTH通訊的敏感度。當相連裝置的天線和本機之間存在障礙
物時,通訊距離將縮短。
內建天線
的位置
以下情況可能會影響BLUETOOTH通訊的敏感度。
本機和BLUETOOTH裝置間有人體、金屬或牆面等障礙物。
無線區域網路裝置、無線電話或微波爐等2.4 GHz頻率的裝置正在本機附近使
用。
因為BLUETOOTH裝置和無線區域網路(IEEE802.11b/g)使用相同的頻率,因此
如果本機在區域網路裝置的附近使用,則可能會發生微波干擾或造成通訊速度延
遲、雜訊或無效連
接。在此情況下,請執行以下步驟。
請在距離無線區域網路裝置至少10 m的地⽅使用本機。
若要在距離無線區域網路裝置10 m內的地⽅使用本機,請關閉無線區域網路
裝置。
將本機和BLUETOOTH裝置安裝在盡量靠近彼此的地⽅。
從BLUETOOTH裝置放射出的微波可能會影響電子醫療裝置的操作。在以下地點請
關閉本機和其他BLUETOOTH裝置,以免造成意外:
有易燃性瓦斯的地點,如醫院、⽕車、飛機或加油站
靠近自動門或⽕警警鈴的地⽅
本機支援符合BLUETOOTH標準的安全功能,以便在使用BLUETOOTH無線技術時提供
安全的連接,但依設定不同而定,安全性可能會不足。使用BLUETOOTH無線技術
進行通訊時,請務必小心。
對於BLUETOOTH通訊期間的資訊外洩,本公司不負有任何責任。
不保證與所有BLUETOOTH裝置均能連接。
有BLUETOOTH功能的裝置必須符合由Bluetooth SIG, Inc.指定的BLUETOOTH標
準並取得認證。
即使連接的裝置符合上述的BLUETOOTH標準,依裝置功能或規格不同而定,部
分裝置仍可能無法正確連接或運作。
使用手機的免持聽筒通話時,依裝置或通訊環境不同而定,可能會產生雜訊。
依要連接的裝置不同而定,可能需要一些時間才能開始通訊。
如果您無法操作本機
重設本機。
請在孔內插入一根小針等物後往下按壓,直到感覺有回彈。沒有刪除配對資訊。
完成上述重設操作後,如果您還是無法操作本機,請依下列⽅式對本機進行初
始化。
按住POWER按鈕超過2秒以關閉本機。然後,按住POWER按鈕和
/按鈕約
7秒。指示燈(藍色)將閃爍4次,此時本機將重設回出廠設定。所有配對資訊
皆被刪除。
什麼是防噪?
防噪電路使用內建麥克風來感應外部噪音,並傳送相等但相反的防噪訊號至本機。
在非常安靜的環境下,防噪效果可能不明顯,或是可能聽到一些噪音。
防噪效果會因您配戴本機的⽅式而異。
防噪功能主要針對處理低頻段的噪音。雖然可以降低噪音,但無法徹底消除。
當您在⽕車或汽車內使用本機時,可能會因道路情況而出現一些噪音。
行動電話可能會造成干擾並產生噪音。如果發生這種情況,請讓本機遠離行動
電話。
請勿用手蓋住耳機的麥克風(MIC)。這可能使防噪功能無法正常運作。
MIC
關於為本機充電
僅可使用USB為本機充電。需要帶有USB連接埠的個人電腦才能充電。
本機無法關閉,並且在充電時無法使用BLUETOOTH功能及雜訊抑制功能。
靜電注意事項
機體內所累積靜電可能會對您的耳朵造成輕微刺痛。若要將此影響降至最低,請
穿著天然材質製造的衣物。
其他資訊
請勿將本機放置在暴露於濕氣、灰塵、油煙或蒸汽,受陽光直射的地⽅或等待紅
綠燈的車內。這樣可能會引起故障。
依無線電波情況和裝備正在使用的地點不同而定,BLUETOOTH裝置可能無法在手
機上作用。
若您在使用BLUETOOTH裝置後感到不適,請立即停止使用BLUETOOTH裝置。萬一問
題持續,請聯絡附近的Sony經銷商。
使用本機時音量很大可能會影響您的聽力。為確保交通安全,請勿在開車或騎腳
踏車時使用本機。
請勿將重物放置在本機上或施加壓力,因為⾧時間存放時可能會造成本機變形。
請勿讓本機受到嚴重撞擊。
請使用柔軟的乾布清潔本機。
請勿將本機放在水中。本機不防水。
務必遵守以下注意事項。
請小心不要讓本機跌落洗滌槽或裝滿水的容器裡。
切勿在潮濕的場所或在天氣不良的情況下使用本機,例如:下雨或下雪。
切勿弄濕本機。
如果用潮濕的手觸碰本機,或將本機放在潮濕的衣物內,則可能會弄濕本機,
並可能造成本機故障。
⾧時間存放或使用可能會使耳罩性能下降。
若您有任何關於本機的疑問或問題未在本說明書中涉及,請聯絡附近的Sony經
銷商。
規格
一般資訊
通訊系統:BLUETOOTH規格版本3.0
輸出:BLUETOOTH規格Power Class 2
最大通訊範圍:直視距離約10 m內
1)
頻段:2.4 GHz波段(2.4000 GHz - 2.4835 GHz)
模組⽅式:FHSS
相容的BLUETOOTH模式
2)
A2DP(進階音訊發送模式)
AVRCP(影音遙控模式)
HFP(免持聽筒模式)
HSP(耳機模式)
支援的Codec
3)
:SBC
4)
,AAC
5)
,aptX
支援的內容保護法:SCMS-T
傳輸範圍(A2DP):20 Hz - 20000 Hz(採樣頻率44.1 kHz)
總降噪比:約17 dB
6)
隨附項目:
無線防噪立體聲耳機(1)
Micro-USB纜線(約50 cm)(1)
連接線(約1.5 m)(1)
參考指南(本手冊)(1)
快速入門指南(1)
1)
實際範圍將會依裝置間的障礙物,微波爐周圍的磁場、靜電、接收敏感度、天線
效能、操作系統、軟體應用程式等因素而有所不同。
2)
BLUETOOTH標準模式代表裝置間的BLUETOOTH通訊目的。
3)
Codec:音訊壓縮和轉換格式
4)
次波段Codec
5)
進階音訊編碼
6)
與未配戴耳機相較,相當於可以降低約98%的聲音功率。
無線防噪立體聲耳機
電源:
DC 3.7 V:內建鋰離子充電電池
DC 5 V:使用USB充電時
質量:約230 g
操作溫度:0℃至40℃
額定功耗:1.5 W
使用時數:
當經由BLUETOOTH裝置連線使用時
音樂播放時間:
最⾧13小時(NC ON),最⾧19小時(NC OFF)
通信時間:
最⾧10小時(NC ON),最⾧12小時(NC OFF)
待機時間:
最⾧26小時(NC ON),最⾧150小時(NC OFF)
當使用隨附的連接線時
最⾧24小時(NC ON)
注意事項:使用時間可能會較短,視Codec和使用情況而定。
充電時間:
約2.5小時
充電溫度:5℃至35℃
接收器
型式:封閉式,動態
激勵單元:40 mm
頻率響應:
8 Hz - 22000 Hz(使用隨附的連接線)
最大輸入:100 mW(使用隨附的連接線)
阻抗:
NC ON:23 Ω(1 kHz)(使用隨附的連接線)
NC OFF:50 Ω(1 kHz)(使用隨附的連接線)
音壓敏感度:
NC ON:102 dB/mW(使用隨附的連接線)
NC OFF:101 dB/mW(使用隨附的連接線)
麥克風
型式:駐極體電容式
⽅向特性:全向式
有效頻率範圍:100 Hz - 4000 Hz
使用USB為電池充電的系統要求
預先安裝以下作業系統和USB埠的個人電腦:
作業系統
(使用Windows時)
Windows
®
8 / Windows
®
8 Pro
Windows
®
7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista
®
(Service Pack 2或更新版本)
Home Basic / Home Premium / Business / Ultimate
Windows
®
XP(Service Pack 3或更新版本)
Home Edition / Professional / Media Center Edition 2004 / Media Center
Edition 2005
(使用Macintosh時)
Mac OS X(10.3或更新的版本)
設計和規格若有變更,恕不另行通知。
MDR-ZX750BN
http://www.sony.net/
©2014 Sony Corporation Printed in Malaysia
System requirements for battery charge using
USB
Personal Computer with pre-installed with any of the following operating
systems and USB port:
Operating Systems
(when using Windows)
Windows
®
8/ Windows
®
8 Pro
Windows
®
7
Home Basic / Home Premium / Professional / Ultimate
Windows Vista
®
(Service Pack 2 or later)
Home Basic / Home Premium / Business / Ultimate
Windows
®
XP (Service Pack 3 or later)
Home Edition / Professional / Media Center Edition 2004 / Media Center
Edition 2005
(when using Macintosh)
Mac OS X (version.10.3 or later)
Design and specifications are subject to change without notice.

Other manuals for Sony MDR-ZX750BN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony MDR-ZX750BN and is the answer not in the manual?

Sony MDR-ZX750BN Specifications

General IconGeneral
Impedance23 Ω
Driver typeDynamic
Driver unit40 mm
Magnet typeNeodymium
Ear coupling-
Headphone frequency8 - 22000 Hz
Headphone sensitivity98 dB
Cable length1.2 m
Headset typeBinaural
Product typeHeadset
Product colorWhite
Wearing styleHead-band
Recommended usageStage/Studio
Microphone frequency- Hz
Battery voltage3.7 V
Battery recharge time2.5 h
Continuous audio playback time13 h
Connectivity technologyWired & Wireless
Connector contacts platingGold
Weight and Dimensions IconWeight and Dimensions
Weight245 g

Related product manuals