Sony MVS-7000X User Manual

73
Key Priority Setting
Chapter 3 Signal Selection and Transitions
It is not possible to select the same key for two or more
priority numbers.
The keys appear in the set order on the program
monitor.
Changing the key priority for after the
transition
1 In the M/E or PGM/PST menu, select first VF7 ‘Misc,’
then HF4 ‘Next Key Priority.’
The Next Key Priority menu appears.
2 For each of <Priority1>, <Priority2>, <Priority3>, and
<Priority4>, select a key, to determine the key priority
sequence.
For details of the key priority sequence, see the figure
shown for step 2 in the previous item (see page 72).
The keys appear in the set order on the preview
monitor.
3 Execute the transition.
The keys are rearranged in the set order on the program
monitor.
Display of the Key Output Status and
Key Priority
You can check whether keys are currently output, and the
key priority setting, using the key status display in the
transition control block of the M/E or PGM/PST bank.
The display is above the next transition selection buttons
[KEY1] to [KEY4] ([DSK1] to [DSK4] buttons in the
PGM/PST bank).
You can change the assignment of the next transition
selection buttons [KEY1] to [KEY4]. If this is changed,
the output status and priority is shown for the assigned key.
Display of the key output status
When a key is included in the output from the M/E or
PGM/PST bank, the corresponding ON indicator lights.
Key priority display
The key priority is indicated by numerals 1 to 4 lighting.
The topmost key as seen on the program monitor is priority
1, and the keys underneath are numbered 2, 3, 4 away from
the viewer (see page 72).
To display the key priority for after the transition, press the
[KEY PRIOR] button in the transition control block,
turning it on. For keys for which the priority after the
transition is different from the current priority, the
corresponding numerals 1 to 4 flash. For a key with the
same priority, the indication remains on.
Example key status display given when the [KEY PRIOR]
button is pressed:
Current key priority: 1, 2, 3, 4
Key priority after the transition: 3, 2, 1, 4
Indicators: 1, 3 (flashing), 2, 1 (flashing), 3, 4
Example key status display
(showing the key priority after the transition)
Priority Setting for Keys 1 to 8
Notes
Priority 1
Priority 2
Priority 4
Priority 3
Notes
Lit
Flashing Flashing
LitLit
Lit

Sony MVS-7000X Specifications

General

Brand	Sony
Model	MVS-7000X
Category	Switch
Language	English