User's manual Sony Personal Navigation System
- 82 - TMC
Hold station, and Frequency input modes.
Auto tuning In Auto tuning mode, the TMC module searches continually
for the station which is best received. The name and the
frequency of the station are being displayed.
1a Use the arrow keys of the "Station" section to receive another
station.
As soon as another station has been found, its name and
frequency are being displayed.
Hold station If you want to hold the sender that is currently being
received, press straight on the centre of the cursor pad as
often as necessary to display Hold station.
The TMC receiver holds now this station. Nevertheless, it
changes the frequency when the same station is better
received on another one.
The name of the station and the frequency on which it is
currently being received are being displayed.
Frequency input If you want to enter a certain frequency switch to the
Frequency input mode.
1a Use the arrow keys of the "Station" section to modify the
frequency in steps of 0.1 MHz.
If a station may be received on the currently tuned frequency
its name is being displayed. The bars at the right of the
frequency indicate the quality of reception.
Press the OK soft key to save the settings and to close the TMC
INFORMATION
screen.
To Next Page
Loading...
Need help?
General
