1
D
C
IN 5.2V
Note
Before attaching the suction cup, clean the attachment surface.
Tip
Retain the removed protection sheet and attach it to the suction cup
when you detach the cradle from the windscreen to keep the suction
cup clean.
Windscreen installation
CHG
P
OWE R
O
FF
O
N
OFF
POWER
ON
1st click
2nd click
Dashboard installation
Note
If you are concerned about car vibration and want to stabilize the unit,
cut the supplied pad to the appropriate size and attach it to the cradle
bottom, to sit between the cradle and dashboard.
2 3
4 5 6 7
See also “Turning the unit on” in the supplied Quick Start Guide.
After the initial installation, park your car in a safe,
open place (no high buildings, etc.) for up to 20 minutes
to allow for GPS signals to be received before using the
navigation system.
Choose an attachment surface that is fl at, smooth and as
horizontal as possible, otherwise the cradle may not attach
properly.
Before attaching the supplied sheet , clean the attachment
surface. Then, proceed from step
1 above.
Note
If you are concerned about car vibration and want to stabilize the unit,
cut the supplied pad to the appropriate size and attach it to the cradle
bottom, to sit between the cradle and dashboard.
Press the button completely.
To Previous Page
Loading...
Need help?
General
