Sony SA-VA15 Service Manual

SA-VATS
— US Model
* REAR SPEAKER
Canadian Model
AEP Model
UK Model
E Model
Australian Mode!
Chinese Model
* FRONT SPEAKER SYSTEM
SPECIFICATIONS
Audio Power Specifications
For front full range/center woofer
speakers: with 8 ohm loads, both
channels driven, from 70 Hz - 20 kHz;
rated 20 watts per channel minimum
RMS power, with no more than 0.9%
total harmonic distortion from 250
milliwatts to rated output.
Amplifier section
Continuous RMS
power output
Center tweeter
Front full range/
Center woofer
Super woofer
Rear
Input sensitivity/
impedance
Output
total 100 W
20 W (8 ohms at 10
kHz,10 % THD)
20W + 20W (8 ohms at
1 kHz, 10 % THD)
20 W (8 ohms at 40 Hz,
10 % THD)
10 W + 10 W (8 ohms at
1 kHz, 10 % THD)
450 mV, 50 kilohms
1/2: 450 mV, 1 kilohm
Center: 350 mV, 1
kilohm
Rear: Accepts only
supplied rear speakers
$S-SR151
R-ch: Accepts only SA-
VA15 R-ch speaker
with supplied exclusive
speaker cord
Tone control
Front/Center
Speaker section
Type
Front speaker
DBR super woofer
Rear speaker
Speaker unit
Front speaker
system
Rear speaker
General
Power requirement
Power consumption
Bass: +10 dB at 100 Hz
Treble: +10 dB at
10 kHz
Bassreflex type
SAW type
Bassreflex type
Center tweeter: 5 cm
cone type (x2)
Front full range/ Center
woofer: 10 cm cone
type (x2)
Super woofer: 13 cm
cone type (x2)
8 cm cone type (x2)
US, Canadian model : 120V AC, 60Hz
AEP, UK, German, Malaysia, Singapore,
Chinese, Australian model :
220 — 230 V AC, 50/60 Hz
US model : 110 W
Canadian model : 120 W
AEP, UK, German, Malaysia, Singapore,
Chinese, Australian model : 80 W
— Continued on next page —
HOME THEATER ACTIVE
SPEAKER SYSTEM
SONY.

Sony SA-VA15 Specifications

General

Brand	Sony
Model	SA-VA15
Category	Speaker System
Language	English