SERVICE MANUAL
SPECIFICATIONS
SDM-X82
TFT LCD Color Computer Display
US Model
Canadian Model
AEP Model
LCD panel Panel type: a-Si TFT Active Matrix
Picture size: 18.1 inch
Input signal format RGB operating frequency*
Horizontal: 28 – 92 kHz
Vertical: 56 – 85 Hz
Resolution Horizontal: Max.1280 dots
Vertical: Max.1024 lines
Input signal levels Analog RGB video signal
0.7 Vp-p, 75 Ω , positive
SYNC signal
TTL level, 2.2 kΩ ,
positive or negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75Ω , n
e
gative
(Sync on green)
Digital RGB (DVI) signal: TMDS
(Single link)
Power requirements 100 – 240 V, 50 – 60 Hz,
Max. A
1.2
Power consumption
Max. 58 W
Operating temperature 5 – 35
°
C
Dimensions (width/height/depth)
Display (upright):
Approx. 450 × 424 × 241 mm
(17
3
/
4
× 16
3
/
4
× 9
1
/
2
inches)
(with stand)
Approx. 450 × 368 × 90 mm
(17
3
/
4
× 14
1
/
2
×3
5
/
8
inches)
(without stand)
Mass
Approx. 8.2 kg (18 lb 15 oz) (with
stand)
Approx. 6.5 kg (14 lb 5 oz)
(without stand)
Plug & Play DDC2B
* Recommended horizontal and vertical timing condition
• Horizontal sync width duty should be more than 4.8% of total
horizontal time or 0.8 µs, whichever is larger.
• Horizontal blanking width should be more than 2.5 µsec.
• Vertical blanking width should be more than 450 µsec.
Design and specifications are subject to change without notice.
To Next Page
Need help?
General
