EasyManuals Logo
Home>Sony>Speaker System>SRS-TP1

Sony SRS-TP1 User Manual

Sony SRS-TP1
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SRS-TP1_U,CA (US/FR/ES) 3-100-971-13(1)
© 2007 Sony Corporation Printed in Thailand
Stereo Speaker
System
SRS-TP1
3-100-971-13(1)
Operating Instructions
Mode d’emploi
Manual de instrucciones
English
Before operating the unit, please read this manual thoroughly and retain it
for future reference.
WARNING
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
To reduce the risk of electrical shock, do not open the cabinet.
Refer servicing to qualified personnel only.
To reduce the risk of fire, do not cover the ventilation of the apparatus with
newspapers, tablecloths, curtains, etc. And do not place lighted candles on
the apparatus.
To reduce the risk of fire or electric shock, do not place objects filled with
liquids, such as vases, on the apparatus.
Do not install the appliance in a confined space, such as a bookcase or
built-in cabinet.
The validity of the CE marking is restricted to only those countries where it
is legally enforced, mainly in the countries EEA (European Economic
Area).
CAUTION
You are cautioned that any changes or modification not expressly approved
in this manual could void your authority to operate this equipment.
Precautions
On placement
Do not set the speaker in an inclined position.
Do not leave the system in a location near heat sources, or in a place
subject to direct sunlight, excessive dust, moisture, rain or mechanical
shock.
On operation
Do not open the cabinet. Refer servicing to qualified personnel only.
Should any solid object or liquid fall into the system, have the system
checked by qualified personnel before operating it any further.
Although this system is magnetically shielded, do not leave recorded
tapes, watches, personal credit cards, or floppy disks with magnetic
coding in front of the system for an extended period of time.
On cleaning
Do not use alcohol, benzine, or thinner to clean the cabinet.
If you have any questions or problems concerning your speaker system,
please consult your nearest Sony dealer.
If the TV picture or monitor display is magnetically
distorted
Although this system is magnetically shielded, there may be cases that the
picture on some TV sets/personal computer sets may become magnetically
distorted. In such a case, turn off the power of the TV set/personal
computer set once, and after 15 to 30 minutes turn it on again. For the
personal computer set, take the appropriate measures such as data storage
before turning it off.
When there seems to be no improvement, locate the system further away
from the TV set/personal computer set. Furthermore, be sure not to place
objects in which magnets are attached or used near the TV set/personal
computer set, such as audio racks, TV stands, toys etc. These may cause
magnetic distortion to the picture due to their interaction with the system.
How to use (See fig. A)
1 Push the plug down to free the cord. (See fig. 1.)
2 Open the case completely. (See fig. 2.)
3 Pull back the top of the case to face the speaker
forwards. (See fig. 3.)
4 Set the speaker in its speaker stand. (See fig. 4.)
Winding up the cord (See fig. B)
1 Wrap the cord in the groove around the case. (See
fig. 1.)
2 Insert the projection of the plug into its retaining
slot in the case. (See fig. 2.)
Hooking up the unit (See fig. C)
Connect the unit to the source device.
When the system is connected to the monaural jack of the source device,
sound may not come through the right speaker. In such a case, use the
optional* plug adaptor PC-236MS.
To connect to a stereo phone-type headphones jack
Use the optional connecting cord RK-G138 or plug adaptor PC-234S.*
* The above optional accessories are not provided in some areas.
Listening to the sound
Before connecting the speaker to the headphone output, reduce the volume
of the source device.
1 Start playing on the source device.
2 Adjust the volume.
Notes
Adjust the volume of the connected source device.
If the source device has a bass boost function or equalizer function, set
them to off. If these functions are on, sound may be distorted.
Troubleshooting
Should you have a problem with your speaker system, check the following
list and take the suggested measures. If the problem persists, consult your
nearest Sony dealer.
No sound
Check that the source device is turned on.
Turn up the volume of the source device as high as possible to the extent
that sound is not distorted. For details on volume adjustment, refer to the
operating instructions supplied with the device.
Make sure all the connections have been correctly made.
Low sound level
Turn up the volume of the source device as high as possible to the extent
that sound is not distorted. For details on volume adjustment, refer to the
operating instructions supplied with the device.
Distorted sound
Turn down the volume of the source device to the point where the sound
is no longer distorted. For details on volume adjustment, refer to the
operating instructions supplied with the device.
If the source device has a bass boosts function, set it to off.
There is hum or noise in the speaker output.
Make sure all the connections have been correctly made.
Make sure none of the audio devices are positioned too close to a TV set.
If the speaker stand and the case become detached
due to impact.
To re-attach the speaker stand and the case, insert the pins in the hinges of
the case (see fig.
D
).
This warranty is valid only in the United States.
Specifications
Speaker section
Speaker system Full range, Open back, Magnetically shielded
50 mm
Impedance 8
Rated input power 0.1 W + 0.1 W
Maximum input power 0.15 W + 0.15 W
General
Input Connecting cord with stereo-mini plug (30 cm) × 1
Dimensions (w/h/d) Folded:Approx, 132 × 21 × 72 mm (5
1
/
4
×
27
/
32
× 2
7
/
8
in.)
Opened:Approx, 132 × 67 × 80 mm (5
1
/
4
× 2
3
/
4
×
3
1
/
4
in.)
Mass Approx, 200 g (7 oz.)
Supplied accessory
Operating Instructions (1)
Optional accessories
Plug adaptor PC-234S, PC-236MS
Connecting cord RK-G138
The above optional accessories are not provided in some areas.
Design and specifications are subject to change without notice.
B
C
A
1 2
3 4
1 2
Speaker
Stand
Case
To headphones jack (stereo mini jack)
Portable audio device, etc.
D
pins
hinges
4
4
2010
This warranty is valid only in the United States.
Cette garantie ne s’applique qu’aux États-Unis.
Esta garantía sólo es válida en Estados Unidos.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony SRS-TP1 and is the answer not in the manual?

Sony SRS-TP1 Specifications

General IconGeneral
TypePortable speakers
Dimensions (WxDxH)132 x 72 x 21 mm
Magnetically shieldedYes
Magnet typeNeodymium
Audio output channels2.0 channels
Impedance8 Ω
Frequency range400 - 17000 Hz
Product colorBlack
Weight and Dimensions IconWeight and Dimensions
Weight199 g
Cord length0.3 m

Related product manuals