After you pair the speaker with a BLUETOOTH device for the first time since purchase
or initialize the speaker (the speaker has no pairing information), the speaker
automatically enters pairing mode when it is turned on. Proceed to step .
When the indicator is flashing slowly
The speaker is searching for a BLUETOOTH device.
To pair the speaker with a second or subsequent BLUETOOTH device (when the
speaker has pairing information of other BLUETOOTH devices), proceed to step
.
To reconnect to the BLUETOOTH device that has been registered (paired),
proceed to step . The speaker will automatically be connected just by turning on
the BLUETOOTH function on the BLUETOOTH device. Depending on the
BLUETOOTH device, it may be reconnected just by turning on the power to the
speaker. For details, refer to the operating instructions supplied with the
BLUETOOTH device.
When the indicator stays lit
The speaker has been connected to the BLUETOOTH device.
To connect to other BLUETOOTH devices, follow one of the procedures below.
To pair the speaker with a second or subsequent BLUETOOTH device (when the
speaker has pairing information of other BLUETOOTH devices), proceed to step
.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
