Sony SRS-XB22 User Manual

Follow the steps below to check the status of
the speaker’s BLUETOOTH indicator.
1. Delete the Bluetooth device information of your playback device.
The method of operation varies depending on the playback device. For details, see the
following.
How to delete the Bluetooth device information of your playback device
If the speaker type isn’t listed in the Bluetooth device information on the playback
device, proceed to step 2.
2. Initialize the speaker.
With the speaker turned on, press the – (volume) button while the speaker is on and press
and hold the (power) button/ PAIRING button for more than 5 seconds. The
power will turn off when initialization is complete.
NOTE: Initializing the speaker resets the volume control, etc. to factory settings and
deletes all pairing (device registration) information. As the location of the buttons on the
speaker varies depending on the product, please see the instruction manual included for
details.
Ex) Location of the volume and power/PAIRING button on the SRS-XB22
3. Turn the speaker on and check the status of the Bluetooth indicator.

Sony SRS-XB22 Specifications

General

Speaker type	Full range
Driver diameter	42 mm
Number of drivers	2
Number of speakers	1
Audio output channels	2.0 channels
Wi-Fi	-
Bluetooth range	10 m
Bluetooth version	4.2
Bluetooth profiles	A2DP, AVRCP, HFP, HSP, SPP
USB connector type	Micro-USB
Connectivity technology	Wired & Wireless
Near Field Communication (NFC)	Yes
Recommended usage	Universal
Audio formats supported	AAC, SBC
Frequency range	20 - 20000 Hz
RMS rated power	- W
Product type	Stereo portable speaker
Product color	Red
Product design	Tube
Volume control	Buttons
Protection features	Water resistant
International Protection (IP) code	IP67
Battery type	Built-in battery
Power source type	Battery
Battery life (max)	12 h

Weight and Dimensions

Depth	68 mm
Width	201 mm
Height	72 mm
Weight	540 g