Sony TA-AX311 Service Manual

SERVICE MANUAL
TA-AX311
US Model
Canadian Model
E Model
Australian Model
SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8-ohm loads, both channels driven,
from 40 - 20,000 Hz; rated 110 watts per
channel minimum RMS power, with less than
0.9% total harmonic distortion from 250
milliwatts to rated output.
Inputs
se ee
PHONO 50 kohms
TUNER, CD, 250 mV 50 kohms
VIDEO, TAPE
SAFETY-RELATED COMPONENT WARNING!!
COMPONENTS IDENTIFIED BY MARK A OR DOTTED
LINE WITH MARK A ON THE SCHEMATIC DIAGRAMS
AND IN THE PARTS LIST ARE CRITICAL TO SAFE
OPERATION. REPLACE THESE COMPONENTS WITH
SONY PARTS WHOSE PART NUMBERS APPEAR AS
SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUB-
LISHED BY SONY.
REC OUT: Voltage 250 mV, impedance
1 kohm
SPEAKER: Accepts speakers of 8 to 16 ohms
HEADPHONES: Accepts headphones with low
and high impedance
Output
Frequency response
PHONO: RIAA curve
TUNER/CD/VIDEO/TAPE: 30 Hz ~ 30 kHz +3 dB
GRAPHIC EQUALIZER controls
Boost/Cut range:
+8 dB (100 Hz, 330 Hz, 1 kHz, 3.3 kHz)
+6 cB (10 kHz)
Dimensions Approx. 430 x 145 x 360 mm (w/h/d)
(17 X 55/gx 14%. inches)
Weight Approx. 9.5 kg (20 Ib. 15 oz.)
Design and specifications subject to change without notice.
ATTENTION AU COMPOSANT AYANT RAPPORT
A LA SECURITE!
LES
COMPOSANTS
IDENTIFIES
PAR
UNE
MARQUE
/\
SUR
LES
DIAGRAMMES
SCHEMATIQUES
ET
LA
LISTE
DES
PIECES
SONT
CRITIQUES
POUR
LA
SECURITE
DE
FONCTIONNEMENT.
NE
REMPLACER
CES
COM-
POSANTS
QUE
PAR DES
PIECES
SONY
DONT
LES
NUMEROS
SONT
DONNES
DANS
CE
MANUEL
OU
DANS
LES
SUPPLEMENTS
PUBLIES
PAR
SONY.
INTEGRATED STEREO AMPLIFIER
ONY.

Sony TA-AX311 Specifications

General

Brand	Sony
Model	TA-AX311
Category	Amplifier
Language	English