35
The INSTALL SETTING Menu
Adjustments and Settings Using the Menu
• The auto V Keystone adjustment may not correct the trapezoidal distortion perfectly, depending
on the room temperature or the screen angle.
• Even when projecting using “Side Shot”, the four sides of a picture may sometimes not be parallel
to the respective sides of a screen frame.
Lamp Mode Sets the lamp brightness in the projection.
• High: Illuminates the projected image brightly.
• Standard: Reduces fan noise and power consumption.
The brightness of the projected image will be lower
compared with the “High” setting.
Standard
Lens Control When set to “Off,” the LENS (FOCUS, ZOOM) key on the
Remote Commander, and the FOCUS and ZOOM keys on
the projector do not function.
On
High Altitude
Mode
Set to “On” when the projector is used at an altitude of
1,500 m or higher.
Off
Security Lock Turns on the projector’s security lock function.
When set to “On,” turns on the security lock function, which
locks the projector once a password has been set.
For details, see “Security Lock” on page 23.
Off
Setting items Functions Initial setting
value
Notes
To Next Page
Loading...
Need help?
General
