SERVICE MANUAL
Sony Corporation
Published by Sony Techno Create Corporation
XM-N1004
SPECIFICATIONS
STEREO POWER AMPLIFIER
9-893-784-01
2013G33-1
©
2013.07
Canadian Model
AEP Model
UK Model
E Model
Ver. 1.0 2013.07
Circuit system OTL (output transformerless)
circuit
Pulse power supply
Inputs RCA pin jacks
Input level adjustment range
0.3 – 6 V (RCA pin jacks)
Outputs Speaker terminals
Speaker impedance
2 – 8 Ω (stereo)
4 – 8 Ω (when used as a bridging
amplifier)
Maximum output
4 Speakers: 170 W × 4 (at 4 Ω)
3 Speakers: 250 W × 2 (at 2 Ω) +
500 W × 1 (BTL, at 4 Ω)
2 Speakers: 500 W × 2 (BTL, at
Rated output
(supply voltage at 14.4 V, 20 Hz – 20 kHz, 1 % THD)
4 Speakers:
70 W × 4 (at 4 Ω)
85 W × 4 (at 2 Ω)
2 Speakers: 175 W × 2 (BTL, at
Frequency response
5 Hz – 50 kHz (
dB)
Harmonic distortion
0.05 % or less (at 1 kHz, 4 Ω)
Low-pass filter 80 Hz, 18 dB/oct
High-pass filter 80 Hz, 12 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5 – 16 V
at rated output: 36 A
(4 Ω, 70 W × 4)
Remote input: 1 mA
Dimensions Appr
(w/h/d) not incl. projecting parts
and controls
Mass Approx. 2.7 kg not incl.
accessories
Supplied accessories
Mounting screws (4)
Protection cap (1)
Design and specifications are subject to change
without notice.
High level input connector
(E and Indian models only)
(E and Indian models only)
2.8 – 12 V (High level input)
High level input cord (1)
(E and Indian models only)
To Next Page
Need help?
General
Weight and Dimensions
