Noise canceling function: ON Ambient Sound Mode: ON Noise canceling function: OFF/Ambient Sound Mode: OFF
Noise canceling function: ON
Ambient Sound Mode: ON
Ambient Sound Mode: ON
Noise canceling function: OFF/Ambient Sound Mode: OFF
Noise canceling function: ON
Noise canceling function: OFF/Ambient Sound Mode: OFF
Note
Depending on the ambient conditions and the type/volume of audio playback, ambient sounds may not be heard even when
using the Ambient Sound Mode. Do not use the headset in places where it would be dangerous if you are unable to hear ambient
sounds, such as on a road with car and bicycle traffic.
Depending on the surrounding environment, wind noise may increase when the Ambient Sound Mode is turned on. In this case,
set the Ambient Sound Mode to OFF.
If the headset is not worn properly in your ears, the Ambient Sound Mode may not work correctly. Twist the headset to put it into
your ears properly.
Do not cover the microphone part on the left or right headset unit with your hand, etc. The effect of the noise canceling function or
Ambient Sound Mode may not work properly or a beeping sound (feedback) may occur. If any of this is the case, remove your
hand, etc. from the left or right microphone part.
If the Ambient Sound Mode is enabled in a rather noisy environment, a noise may be heard. This is not a malfunction. In this
case, set the noise canceling function to ON or set the noise canceling function and the Ambient Sound Mode to OFF.
Related Topic
Wearing the headset
Using the noise canceling function
What you can do with the “Sony | Headphones Connect” app
5-048-298-11(1) Copyright 2023 Sony Corporation
To Next Page
Loading...
Need help?
General
