AIR BAG SYSTEM
korando 2010.10
8810-00
1. SPECIFICATION
Operating voltage 9 to 16 V
Voltage for system diagnosis and SDM self diagnosis 9 to 16 V
Ignition voltage for side air bag and pretensioner 9 to 16 V
Communication voltage for front impact sensor 9 to 16 V
Communication voltage for side impact sensor 9 to 16 V
Operating temperature
Storage temperature
Ignition temperature
Over voltage protection 24 V
2. MAJOR REPLACEMENT PARTS AFTER AIR BAG
DEPLOYMENT
1) In Case of Front Air Bag Deployment
Air bag unit and its wiring (including connector), seat belt pretensioner and its wiring (including
connector), whole front air bags, instrument panel, front impact sensor and other damaged
components
2) In Case of Curtain Air Bag Deployment
Deployed curtain air bag, air bag unit and its wiring (including connector), impact G sensor
assembly for curtain air bag, damaged trim, seat and roof headlining
To Next Page
Need help?
General
