4. ASSEMBLY
IMPORTANT The safety regulations
to follow are described in chap. 2. Strictly
comply with these indications to avoid
serious risks or dangers.
Unpacking and completing the
assembly should be done on a at and
stable surface, with enough space for
machine handling and its packaging,
always making use of suitable equipment.
Do not use the machine until all the
indications provided in the “ASSEMBLY”
section have been carried out.
4.1 ASSEMBLY COMPONENTS
4.1.1
1.
2.
3.
4.
5.
Before assembling, make sure the
battery is not inserted in its housing.
4.2 ROD INSTALLATION
The rod length is adjustable
4.3 FITTING THE FRONT HAND GRIP
4.4 FITTING THE GUARD ON
THE CUTTING MEANS
Wear protective gloves.
Every cutting means must
be tted with a specic guard, as
indicated by the following directions
in the Technical Data table.
1.
2.
NOTE On the guard of the cutting
means there is the following symbol:
Indicates the rotation
direction of the
4.5 FITTING THE INDICATOR
ON THE CUTTING LIMIT
5. CONTROLS
5.1
Press this button to activate
To Next Page
Loading...
Need help?
General
Weight and Dimensions
