FS 111, FS 111 R
English
45
All accessible screws and nuts (not adjust-
ing screws)
Retighten X
Anti-vibration elements (rubber buffers,
springs)
Check XXX
Have replaced by servicing dealer
1)
X
Cutting attachment
Visual inspection XX
Replace X
Check tightness XX
Metal cutting attachment Sharpen XX
Gearbox lubrication
Check X
Replenish X
Safety labels Replace X
1)
STIHL recommends an authorized STIHL servicing dealer.
2)
Only if there is a noticeable loss of engine power
The following intervals apply to normal operating conditions only. If your daily work-
ing time is longer or operating conditions are difficult (very dusty work area, etc.),
shorten the specified intervals accordingly.
before starting work
after finishing work or daily
after each refueling stop
weekly
monthly
every 12 months
if problem
if damaged
as required