Stihl FS 511 C-M User Manual

–
Length without cutting tool: 1,760 mm
–
Max. fuel tank capacity: 990 cc (0.99 l)
19.2 Brushcutter STIHL 561 C-M
–
Displacement: 57.1 cm³
–
Engine power to ISO 8893: 2.8 kW (3.8 bhp)
at 9,500 rpm
–
Idle speed : 2,500 rpm
–
Max. output shaft speed: 7,890 rpm
–
Approved spark plug: NGKBPMR7A from
STIHL
–
Electrode gap of the spark plug: 0.5 mm
–
Dry weight without cutting attachment and
deflector: 10.2 kg
–
Length without cutting tool: 1,760 mm
–
Max. fuel tank capacity: 990 cc (0.99 l)
19.3 Sound Values and Vibration
Values
The K-value for sound pressure levels is 2 dB(A).
K-value for sound power levels is 2 dB(A). The
K-value for vibration level is 2 m/s².
Using with a mowing head
FS 511 C-M
–
Sound pressure level L
pA
measured according
to ISO 22868: 101 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 114 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 3.7 m/s².
–
Left handle: 3.7 m/s².
FS 561 C-M
–
Sound pressure level L
pA
measured according
to ISO 22868: 101 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 115 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 3.7 m/s².
–
Left handle: 3.7 m/s².
Using with a metal cutting attachment
FS 511 C-M
–
Sound pressure level L
pA
measured according
to ISO 22868: 101 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 115 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 3.0 m/s².
–
Left handle: 3.0 m/s².
FS 561 C-M
–
Sound pressure level L
pA
measured according
to ISO 22868: 102 dB(A).
–
Sound power level L
wA
measured according to
ISO 22868: 115 dB(A).
–
Vibration level a
hv
measured according to
ISO 22867:
–
Control handle: 3.3 m/s².
–
Left handle: 3.3 m/s².
For information on compliance with Employers'
Vibration Directive 2002/44/EC see
www.stihl.com/vib.
19.4 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
19.5 Exhaust Emissions
The CO
2
value measured in the EU type approval
procedure is specified at www.stihl.com/co2.
The measured CO
2
value was determined on a
representative engine in accordance with a
standardized test procedure under laboratory
conditions and does not represent either an
explicit or implied guarantee of the performance
of a specific engine.
The applicable exhaust emission requirements
are fulfilled by the intended usage and mainte‐
nance described in this instruction manual. The
type approval expires if the engine is modified in
any way.
English 19 Specifications
22 0458-856-0121-A. VA0.B21.

Stihl FS 511 C-M Specifications

General

Brand	Stihl
Model	FS 511 C-M
Category	Trimmer
Language	English