- 17 -
MAINTENANCE PROCEDURES TO HELP PREVENT CORROSION
Washing
The best way to preserve the nish on your Vehicle and help avoid corrosion is to keep it clean with frequent washing. If you
are frequently driving on salted roads, your Vehicle should be washed at increased intervals based on the frequency of exposure
to these conditions. If you are living near an ocean, your Vehicle should be washed at regular intervals throughout the year.
Washing Instructions
1. Wash the underbody of your Vehicle rst. High pressure water or steam is most eective for cleaning this area. Ensure that
all debris such as road salt, chemicals, mud and dirt is removed from the underbody, especially in hard to reach areas.
2. Wash the exterior of your Vehicle in a shaded area using only lukewarm or cold water. Remove all dirt and mud from the
body with running water. Dirt which is hard to remove should be washed o with a sponge using plenty of water. A mild
soap or detergent can be used, however these cleaning agents should be promptly washed o and not allowed to dry on
the nish.
3. After washing the Vehicle, be certain that all drain holes are unobstructed.
Foreign Material Deposits
Foreign material such as salts, chemicals, road oil or tar, tree sap, bird droppings and industrial fallout may damage the nish of
your Vehicle if it is left on painted surfaces. Remove these types of deposits as quickly as possible. If these deposits are dicult
to wash o, an additional cleaner may be required. Ensure that any cleaner that you select is compatible to the Vehicle paint
nish and that the manufacturer’s instructions are carefully followed.
Carefully examine your Vehicle for damage to the painted surfaces, especially if it is used on unpaved roads. Should you nd
any chips or scratches in the paint, touch them up immediately to prevent corrosion from starting. If the chips or scratches
have gone through to the bare metal, have a qualied body shop make the repair.
To Next Page
Loading...
Need help?
General
