Towing Capabilities
12
Model Engine / Chassis MTPLM Permissible Permissible Gross Train Maximum Maximum
Front Axle Load Rear Axle Load Weight Towing Weight Nose weight
Kon-tiki 600 2.8L JTD Ducato 15 / Al-Ko Low Frame 3.4T 3400 1690 1900 5200 1800 < 2000 80
Kon-tiki 600 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 610 2.8L JTD Ducato 15 / Al-Ko Low Frame 3.4T 3400 1690 1900 5200 1800 < 2000 80
Kon-tiki 610 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 615 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 635 2.8L JTD Ducato 18 / Al-Ko Low Frame 4.0T 4000 1850 2300 5500 1500 < 2000 80
Kon-tiki 645 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1500 < 2000 80
Kon-tiki 645 2.8L JTD Ducato 18 / Al-Ko Low Frame 4.0T 4000 1850 2300 5500 1500 < 2000 80
Kon-tiki 650 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 650 2.8L JTD Ducato 18 / Al-Ko Low Frame 4.0T 4000 1850 2300 5500 1500 < 2000 80
Kon-tiki 655 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 655 2.8L JTD Ducato 18 / Al-Ko Low Frame 4.0T 4000 1850 2300 5500 1500 < 2000 80
Kon-tiki 660 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
Kon-tiki 665 2.8L JTD Ducato 18 / Al-Ko Low Frame 3.85T 3850 1850 2120 5500 1650 < 2000 80
To ensure adequate road holding, the load on the front axle, under all conditions, must not be less than 42% of the total weight.
The permissible payloads of the axles and MTPLM must not be exceeded under any circumstances.
Nose weight figures are set based on meeting the 'maximum rear axle' loading and 'minimum front axle' loading. These figures are based on loading
conditions in an MRO and MTPLM condition. It is your responsibility to ensure that loading in any other condition meets the requirements stated above.
Kon-Tiki Towing Capabilities
To Next Page
Loading...
Need help?
General
