TASCAM BD-MP1
BD-MP1
TASCAM BD-MP1 1
Updating the firmware
Update file types
The following four types of update files have been prepared for products delivered to different regions.
(For detailed information about updates, refer to the documentation included with the distributed update files.)
Firmware file name Region Region code
BD-MP1_RXXX.XXX_FW_DM.zip Japan DM
BD-MP1_RXXX.XXX_FW_EXTC.zip North and South America, Southeast Asia, Korean Peninsula, Taiwan EX/T/C
BD-MP1_RXXX.XXX_FW_EX.zip Europe, Near and Middle East, Africa, Oceania EX
BD-MP1_RXXX.XXX_FW_CHI.zip Central and South Asia, China, Russia, Mongolia CHI
*
Updating is not possible if the update file region differs from that of the product being used.
Checking the firmware revision and product region
o
Before starting a firmware update, check the firmware revision and product region of the BD-MP1 being used. From the unit’s Home Screen,
open the Settings menu System Information screen, and check the firmware revision and product region (see the illustrations below).
(See the Owner’s Manual for details about operation of the unit.)
HOME Screen Settings menu
System Information screen
The screen above shows the model name with the region code, the MAC address and the firmware revision.
CAUTION
i
The region code will not be shown if the firmware version is older than 206.416.
If this is the case, see "If the region code is not shown" on page 2.
i
There is no need to update if the system firmware revision shown here is the same or newer than the intended update.
To Next Page
Need help?
General
