Keep pressing the cool air blow button (C) to
use this function.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
Stop the appliance by selecting “0” on the
speed selector (E).
Unplug the device from the mains.
Clean the appliance.
ACCESSORIES:
AIR CONCENTRATOR ACCESSORY (G):
This accessory lets concentrate the airow into
one specic area.
Attach the unit to the product by pressing until
you hear a click (Fig. 1).
CLAW COMB ACCESSORY (H):
This accessory lets concentrate the airow and
comb one specic area.
Attach the unit to the product by pressing until
you hear a click (Fig. 1).
DIFFUSER ACCESSORY (I):
This accessory harmonizes the airow into one
specic area.
Attach the unit to the product by pressing until
you hear a click (Fig. 1).
SAFETY THERMAL PROTECTOR:
The appliance has a safety device which
protects the machine from overheating.
CLEANING
Disconnect the appliance from the mains and
allow it to cool before cleaning.
Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry it.
Do not use solvents, or products with an
acid or base pH, such as bleach, or abrasive
products, for cleaning the appliance.
Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
Never submerge the appliance in water or any
other liquid or place it under running water.
CLEANING THE FILTER:
For proper operation of the device, periodically
clean the air inlet lter.
To do this, turn the lter counterclockwise.
Clean the lter and remove any dirt or hair.
Put the lter back in its place and turn it
clockwise.
Downloaded by: pd-oliana on 04-04-2023 14:50 CEST
To Next Page
Loading...
Need help?
General
