TCL ALTO 6+ User Manual

26
Note
Do not press PAIR at the back of the wireless
subwoofer during auto pairing.
Manual pairing
1
Make sure the Sound Bar and wireless subwoofer are
properly connected to the power supply.
2
Press PAIR at the back of the wireless subwoofer until
The wireless subwoofer is ready to pair.
3
4 LEDs flash.
Pairing is successful. The amber LED remains on solidly.
Note
the amber LED on the subwoofer flashes quickly.
If the amber LED at the back of the subwoofer still flashes
after pairing, it means pairing is not successful.
Disconnect the AC power cord from the wireless
subwoofer and then connect again after 3 minutes. Then
repeat steps 1 to 3.
Press and hold button on the Sound Bar main unit or
the remote control,

TCL ALTO 6+ Specifications

General

Brand	TCL
Model	ALTO 6+
Category	Speaker System
Language	English