14
Country/Region
Select country or region in this item.
Channel
Different regions use different channels: Channel 1-11 in FCC (US) /
IC (Canada), Channel 1-13 in ETSI (Europe), and Channel 1-13 in MKK
(Japan).
802.11 Mode
The mode is set to
802.11b/g/n
by default.
AP isolation
The AP isolation function enables you to create a separate virtual
network for each wireless client that is connected to your CPE network.
When this function is enabled, all wireless devices in the network will
not be able to communicate with each other.
Bandwidth
Select the available options from the drop-down menu.
WPS
Wi-Fi Protected Setup (WPS) is a wireless network security standard that tries to make
connections between your CPE and wireless devices faster and easier.
If your wireless device is WPS-supported, you can access the CPE Wi-Fi network through a
WPS connection. In this option, there are two WPS modes available.
WPS PIN
1. Set a WPS PIN code, and click
Apply
.
2. Enable the WPS function of your wireless device, and enter the WPS
PIN code within 2 minutes to make a WPS connection.
PBC
1. Click
Apply
. The WPS function is enabled for 2 minutes.
2. Enable the WPS function of your wireless device to make a WPS
connection.
Security
PIN management
Enable SIM PIN
1. When the SIM PIN feature is disabled, click
.
2. Set an SIM PIN code that is 4 to 8 digits long.
3. Click
Apply
.
Disable SIM PIN
1. When the SIM PIN feature is enabled, click
.
2. Enter the current SIM PIN code.
3. Click
Apply
.
To Next Page
Loading...
Need help?
General
