22
with voice prompts and white light fast flash.
1. Put the phone within 3m in distance;
2. Activate the Bluetooth function of the phone, so that the
phone starts to search for the Bluetooth device (please
refer to the phone instructions for details);
3. Select "TCL S522W" from the device that has been
searched for, click connection, with voice prompt;
4. If the phone remind you to enter password, enter “0000”
and press confirm button to match soundbar to the phone;
5. Press the back button of the phone to exit the phone
menu. Make sure the distance between soundbar and
phone is within 10m and there is no obstacles. At this
time, music can be played on the soundbar;
6. Short press " " to play and pause music. Short press "
" or " " button to previous or next song;
7. To disconnect, short press or long press the " " button
on the soundbar, At this time, another mobile phone
device can be used to connect Bluetooth playing; If
the connection is not selected, the machine will be on
waiting for connection status.
z
AUX Mode
After power on, connect the external audio sources to the
AUX jack of soundbar by using the 3.5mm audio cable, and
then Press the " " button on the soundbar or the "AUX"
button on the remote control to switch to "AUX" mode. At this
time, music from the external audio sources such as MP3/CD
can be played. (please adjust the volume of the external audio
sources accordingly at a comfortable level.)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
