TCL Sweeva2000 User Manual

- 13 -
3
2
1
44
Robot clean area
Restricted area
Robot clean area
Magnetic stripe
virtual wall
Double-sided tape
Stick the virtual device firmly on the floor. Please do not paste a virtual wall near the
charging based, so as not to affect recharge.
Red
Orange
Error warning
In low battery stat at working mode/standby mode/return to
charging base
Error Tones and Indicators
Roller brush stuck
One beep, flash red light
Turn off Sweeva s and remove any hair or debris from the roller '
brush.
Side brush failure
Two beeps, flash red light
Turn off Sweeva s and remove any hair or debris from the side '
brushes.
Forward collision
bumper stuck
Four beeps, solid blue light
After repairing the stuck forward collision bumperpress the
“ start button ” to restart the robot.
Low battery
warning
Seven beeps, solid orange light
Manually put the robot to the charging base for charging.
Key indicator status description
How to turn off the robot
Turn off the power button on the bottom side of the robot (turn the gear to “ OFF ” state)
Status
Blue
Red flashes
Error warning
Orange flashes
The appliance is charging
Buzzer alarm
Action
Anti-drop
sensors are dirty
Two beeps, solid blue light
Clean the anti-drop sensors.
Side wheel failure
Three beeps, flash red light
Turn off Sweeva s and remove any hair or debris from the wheel.'
Suction failure
Five beeps, flash red light
1.Turn off Sweeva s, then remove and empty the dust collector.'
2.Make sure the suction inlet is not blocked by any hair or debris.
Normal power, can enter working mode/standby mode as
required
EN

TCL Sweeva2000 Specifications

General

Brand	TCL
Model	Sweeva2000
Category	Vacuum Cleaner
Language	English