EasyManuals Logo
Home>Technics>Stereo System>SC-C70

Technics SC-C70 Owner's Manual

Technics SC-C70
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
English
15
(15)
Using the WPS PIN code
“WPS PIN”
If your wireless router supports WPS, you can
set up a connection by entering the WPS PIN
code.
For details on how to enter the PIN code, refer
to the operating instructions of the wireless
router.
1 Press [ ], [ ] on the remote control
to select “WPS PIN” and then press
[OK].
The PIN code is displayed. Complete step 2
within 2 minutes.
2 Enter the PIN code into the wireless
router from PC, etc.
“Linking” is displayed.
When the connection is established,
“Success” is displayed.
- “Fail” may be displayed if the connection
was not complete. Try this method
again from [SETUP] menu. If “Fail” is still
displayed, try other methods ( 13).
3 Press [OK] on the remote control to
exit the setting.
” is displayed.
Note
Depending on a router, other connected
devices may temporarily lose their connection.
For details, refer to the operating instructions
of the wireless router.
Using “Technics Music App”
“Setup from Browser”
If you install the dedicated app “Technics
Music App” (free of charge) on your Android
device, you can set up a connection using the
application.
If you’re using an Android device, download
the app at Google Play.
Check the password for your home wireless
network.
Make sure your Android device is connected to
your home wireless network beforehand.
This unit uses the 2.4 GHz frequency band
only. Check your Android device is connected
using 2.4 GHz band.
1 Press [ ], [ ] on the remote control
to select “Setup from Browser” and
then press [OK].
“Setting” is displayed.
2 Start “Technics Music App” on the
Android device.
3
Select “
” and go to Wi-Fi settings.
4 Enter the password for your home
wireless network.
5 Select “Next” to apply the settings.
“Linking” is displayed.
When the connection is established,
“Success” is displayed.
- “Fail” may be displayed if the connection
was not complete. Try this method
again from [SETUP] menu. If “Fail” is still
displayed, try other methods ( 13).
Depending on the device, the connection
complete screen may not be displayed.
6 Make sure to connect your Android
device back to your home wireless
network.
7 Press [OK] on the remote control to
exit the setting.
” is displayed.

Other manuals for Technics SC-C70

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Technics SC-C70 and is the answer not in the manual?

Technics SC-C70 Specifications

General IconGeneral
BrandTechnics
ModelSC-C70
CategoryStereo System
LanguageEnglish

Related product manuals