Technics SL-PJ37A User Manual

BE PLACEMENT
Before placement
Two transport security devices are secured to prevent the optical
pickup from damage during transport.
Be sure to release them before use.
RELEASED
Insert them here after removing.
Turn clockwise by 90° to secure
them.
Soft cloth or similar material (to
prevent scratches)
Note:
When transporting the unit, be sure to remove the compact disc
from inside the unit. And replace the transport security devices
again following the reverse order not to damage the optical pickup.
& CLEANING OF LENS
If the lens is stained causing sound skip or operation failure,
open the top cover by pressing the open button, and clean
the lens.
e To remove dust or dirt
Blow the lens with the biower provided in the cleaning kit
to remove dust or dirt.
Dust or dirt
Fingerprint
« To remove fingerprint
lf the blower is not enough, moisten the cotton rod
with the lens cleaner solution and wipe the lens with it
from center of the lens to outside.
& ACCESSORIES
@ AC power supply cord........ 1
SFDACO5E03 (E, EG)
SJA188 (EB)
@ L-type cable...............0. 2
(SJP2257T)
Notes of placement
& This unit is a precision instrument. Be sure to place it ona
flat surface.
B Avoid places such as the following:
Near any equipment or device that generates strong magnetism.
®On any heat-generating equipment or device, or in any place
where the temperature is high (35°C or higher).
*Extremely cold places (5°C or below).
eNear a tuner or TV (it may cause noise in the broadcast, or
disturbance of the TV picture.)
@ When carrying or storing the unit, handle it with care so itis
not subjected to any strong bumps.
Always remove the disc before storing the unit for any period of
time.
@ To avoid problems due to vibration.
eDo not place a book or similar object under this unit.
Do not route the connection cables (of this or other units) across
the operation panel, across the top, or under the unit.
Cautions:
© Do not directly apply the cleaner solution to the lens.
Do not apply too much solution to the cotton rod or
otherwise the solution will flow into the player.
Wipe the lens carefully. Do not give too much stress to
the lens or otherwise it may scratch the lens or cause
optical pickup trouble.
If the solution should be too much applied, wipe the
lens with a dry cotton rod.
Lens cleaning kit (Part No. : SZZP1038C)
® Optical-fiber cable ......... 1
(SUPD 16)

Technics SL-PJ37A Specifications

General

Brand	Technics
Model	SL-PJ37A
Category	CD Player
Language	English