Technics SL-PJ37A User Manual

Control section
@P Power switch (POWER EOFF = ON)
@ Disc holder
3) Repeat button (@> REPEAT)
€@} Skip buttons (<< SKIP >!)
These buttons can be used to skip by track in the forward or
reverse direction.
@ Search buttons (<< SEARCH PP)
These buttons can be used to move rapidly forward or
backward on the disc during play. The search speed is slow
when the button is pressed at first and becomes faster if the
button is pressed and held continuously.
G Numeric buttons (+10, 0, 1~9)
These buttons can be used to select the track numbers and
the recording time.
& Buttons for program function
eProgrammed-play button (PROGRAM)
Pressing this button initiates the programmed play mode.
You can then enter specific tracks using the numeric
buttons.
e Clear button (CLEAR)
Each pressing this button makes one track cleared from the
programmed sequence.
© Buttons for CD edit function (CD EDIT)
© Edit tape length button
(EDIT TAPE LENGTH)
When compact discs are to be recorded to tape, this button
can be used to calculate the number of tracks that can be
recorded on each side of the tape, depending on the length
of the cassette tape used, so that as little tape as possible is
wasted.
®Tape-side select button (TAPE SIDE A/B)
When recording compact discs to tape, this button can be
used to check the number of tracks and amount of tape left
over for side A or B.
© Time mode select button (TIME MODE)
Use this button to select the desired time display mode.
@) Auto cue button (AUTO CUE)
Pressing this button causes the unit to skip automatically to
the beginning of the next track on the disc and switch to the
play standby mode.
® Play button ( [>> PLAY)
@® Pause button (If PAUSE)
® Stop button (K STOP)
This button can be used to stop the disc play, as well as to
cancel the various play modes.
@® Disc holder open/close button
(4 OPEN/CLOSE) —

Technics SL-PJ37A Specifications

General

Brand	Technics
Model	SL-PJ37A
Category	CD Player
Language	English