Technics ST-X302L Service Manual

ST-X302L
Timer section
[41] Clock set button (CLOCK SET)
This button can be used, when setting the unit to the present
day and time, to select the item (day, hour and minute) to be
set next.
[2] Sleep button (SLEEP)
This button can be used to set the time at which the power
will be switched OFF.
[3] Cancel button (CANCEL)
This button can be used to erase the timer setting or to
cancel a setting that is being made, if, for example, you
decide to do something else.
[4] Stand-by button (STANDBY)
This button can be used to temporarily cancel the timer
setting.
[5| Read button (READ)
This button can be used to check the programmed setting.
[6] Timer set button (TIMER SET)
This button can be used, when making the timer setting, to
select the type of timer operation, the day, the time, etc.
Select buttons (SELECT)
These buttons can be used to set the unit to the present day
and time, and for setting the day, time, etc. for timer opera-
tion.
Display section .
[A] Timer-mode indicator
(ONCE/WEEKLY/SLEEP)
This indicator shows the type of timer operation that has
been selected.
Stand-by indicator (STANDBY)
This indicator shows that the timer has been set to operate
at the programmed time.
Day display
This display shows the present day, and (if the timer has
been set) the day it has been set for.
[D] Timer ON/OFF indicator (ON/OFF)
This indicator shows whether the times for timer switch-ON
and switch-OFF have been set.
[E] Time display
This display shows the present time, and (if the timer has
been set) the time it has been set for.
[F] Colon indicator
This indicator shows, by flashing continuously, that the clock
is operating.
[G] Tuning-mode indicator
(AUTO/MANUAL/PRESET/LOCK)
The words “AUTO”, “MANUAL”, “PRESET” and “LOCK”
illuminate in succession each time the tuning-mode selector
is pressed.
[H] FM stereo indicator (STEREO)
This indicator automatically illuminates when an FM stereo
broadcast is being received.
It will not illuminate if the FM mode selector is set to the
monaural mode.
[1] Digital frequency display
For timer operation, “CD” and "TAPE" are disph yed.
Quartz-lock indicator (QUARTZ LOCK)
This indicator illuminates when the unit is tuned gr ecisely to
a broadcast station.
[K] Memory indicator (MEMO)
This indicator illuminates when the memory button is
pressed.
Channel display
This display shows the channel number selectec by one of
the preset-channel buttons.
[M| FM mode indicator (AUTO/MONO)
When FM broadcasts are being received, ts ually the
“AUTO” indication is illuminated.
When the FM mode selector is used to seleci monaural
reception, the word “MONO” illuminates.
[N] Timer play/rec indicator ({J PLAY/ @% EC)

Technics ST-X302L Specifications

General

Brand	Technics
Model	ST-X302L
Category	Tuner
Language	English