Technoline WT 199 User Manual

adjust the hour.
4. Press the ALARM SET key again to return to alarm time display.
5. Press the ALARM ON/OFF key once to activate alarm on function and twice to activate snooze function. Press the
ALARM ON/OFF key once more, the alarm on function will be inactivated.
6. Press TIME SET key to return to normal display mode.
FUNCTION KEYS
SNOOZE/LIGHT
- When the snooze alarm beeps, press the SNOOZE/LIGHT key to pause the alarm for 5 minutes and the snooze
function can be used repeatedly. To stop snooze function, just press other keys once.
- Press the SNOOZE/LIGHT key to illuminate the LCD for 3 seconds.
C/F KEY, WAVE
- In normal time display, press the C/F key to toggle between Celsius and Fahrenheit temperature readings.
12/24 KEY
- In normal time display, press the 12/24 key to toggle between 12h and 24h display.
WAVE KEY
- In normal time display, press and hold the WAVE key for 3 seconds to activate the DCF scanning function.
- If the clock is scanning for the DCF signal, press the WAVE key once to inactivate the DCF scanning function.

Technoline WT 199 Specifications

General

Brand	Technoline
Model	WT 199
Category	Clock Radio
Language	English