1 Preparation
Place your steam
generator on a stable,
heat resistant surface.
4 Plug in
Completely unwind the
power cord and plug in.
6 Thermostat
Position the iron’s thermostat control
to the type of fabric to be ironed and
adjust the steam control dial e.g. lower
output for delicate fabrics.
5 Switch on
Switch on by pressing
the on/off switch.
The green light on the
control panel flashes.
Quick start guide
Please follow the instructions for use carefully. However, for ease of use we have also prepared this Quick start guide.
3
7
Ready to use
The iron is ready to use
when the thermostat light
goes out and the green light
on the control panel stops
flashing, after approximately
2 minutes.
2 Filling with water
Fill the water tank
with tap water.