Tektronix MSO2024B Programmer's Manual

Commands Listed in Alphabetical Order
DISplay:INTE
NSITy:GLITch
Sets the intensity of the glitch capture background of the waveform display. The
intensity can be set from 5 to 100% in increments of 5%. The intensity of the glitch
capture back
ground can only be adjusted when the glitch capture background is
displayed and FilterVu filtering is in use. Otherwise, the intensity is fixed.
Use DISplay
:GLITch to turn the glitch capture background ON and OFF.
Use FILTERVu:FREQuency to enable filtering. Filtering is enabled if the
frequency
chosen is different than the oscilloscope's full bandwidth.
Group
FilterVu
Syntax
DISplay:INTENSITy:GLITch {<NR1>}
Related Commands
Arguments
<NR1> is the glitch intensity and ranges from 5 to 100 percent.
Examples
DISPLAY:INTENSITY:GLITCH ? might
return
DISPLAY:INTENSITY:GLITCH
5
indicating that the glitch intensity is 5%.
DISplay:INTENSITy:GRAticule
Sets and returns the display graticule intensity settings.
Group
Display
Syntax
DISplay:INTENSITy:GRAticul e <NR1>
DISplay:INTENSITy:GRAticul e?
Arguments
<NR1> is the graticule intensity and ranges from 0 to 100 percent.
Examples
DISPLAY:INTENSITY:GRATICUL E? might return
DISPLAY:INTEnsITY:GRATICUL E 30
DISplay:INTENSITy:WAVEform
Sets and returns the display waveform intensity settings.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-143

Tektronix MSO2024B Specifications

General

Brand	Tektronix
Model	MSO2024B
Category	Test Equipment
Language	English