Tektronix MSO2024B Programmer's Manual

Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:SCAle <NR3>
HORizontal:SCAle?
Arguments
<NR3> specifies the range from 2 ns to 100 s, depending on the oscilloscope model.
Examples
HORIZONTAL:SCALE 2E-6 sets the main scale to 2µs per division.
HORIZONTAL:SCALE? might return :HORIZONTAL :MAIN:SCALE 2.0000E-06
indicating that the main scale is currently set to 2 µs per division.
HORizontal:TRIGger:POSition
Sets the horizontal position when d elay mode is OFF. It is similar to
HORizontal:POSition.
Group
Horizontal
Syntax
HORizontal:TRIGger:POSitio n
HORizontal:TRIGger:POSitio n?
Examples
HORIZONTAL:TRIGGER:POSITIO N? might return
HORIZONTAL:TRIGGER:POSITIO N 50 indicating that the horizontal trigger
position is set to 50%.
ID? (Query Only)
Returns identifying information about the oscilloscope and related firmware.
Group
Miscellaneous
Syntax
ID?
Related Commands
*IDN?
Examples
ID? might return TEK/DPO2024,CF:91.1CT,FV:v1.0000. This indicates the
oscilloscope model number, configured format, and firmware version number.
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-171

Tektronix MSO2024B Specifications

General

Brand	Tektronix
Model	MSO2024B
Category	Test Equipment
Language	English