Tektronix RSA306 Installation Instructions

Kit description
Kit description
The rackmount kit is a collection of parts that, once installed, holds one or two
RSA306 or RSA306B Real-Time Spectrum Analyzers, for mounting into a
standard 19-
inch equipment rack. You will need a Phillips #2 screwdriver and a
3/8 inch nut driver (wrench or socket) to complete the installation.
2 RSA306B Rackmount Kit Installation

Tektronix RSA306 Specifications

General

Brand	Tektronix
Model	RSA306
Category	Measuring Instruments
Language	English