TDS 600C Features
TDS 500D, TDS 600C & TDS 700D Supplement
3
If your TDS 600C contains the optional hard disk, you can use it to save and
recall waveforms, setups, and hard copies as described in the TDS 500D,
TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual. With this
option, you can also run Java-based application programs.
The TDS 600C is compatible with Iomega 100 Mbyte Zip drives as described in
the TDS 500D, TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual.
The TDS 600C can display statistics about a measurement as described in the
TDS 500D, TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual.
The TDS 600C can take Extinction Ratio, Extinction Percent, Extinction dB, and
Mean dBm measurements as described in the TDS 500D, TDS 600B &
TDS 700D Digitizing Oscilloscopes User Manual.
The TDS 600C can set External Attenuation as described in the TDS 500D,
TDS 600B & TDS 700D Digitizing Oscilloscopes User Manual.
On the TDS 600C, use the TDS 500D and TDS 700D procedures to calibrate a
probe as described in the TDS 500D, TDS 600B & TDS 700D Digitizing
Oscilloscopes User Manual.
Option HD
Iomega Zip Drive Support
Display Measurement
Statistics
Take Optical
Measurements
External Attenuation
Probe Calibration
To Next Page
Loading...
Need help?
General
