How To Guide
www.tektronix.com/products/video_test/6
How to set-up the Spearhead display in the WFM8300
Option PROD required
Note: For the purpose of this description I have used a 4-Tile screen setup but you could do this in the Full Screen Mode as well.
How to Congure Spearhead Display
1. Select one of the tiles (1,2,3 or 4) and press the GAMUT button.
2. Push and Hold the GAMUT button to enable the menu.
3. The menus should so the Display Type navigate using the up and down arrow keys or the general know to the
Spearhead selection.
You can also save this as a Preset by Depressing the PRESET Button and then selecting the location you want to save it to.
After saving the preset you can rename it as shown in this example.
Figure 8. WFM8300 Front Panel.
To Next Page
Loading...
Need help?
General
