Click here to find instructions on setting up WPA or WPA2 personal wireless security on a
Tenda wireless device.
Note:You’d better select AES as the WPA-Algorithms/Cypher Type/WPA Encryption.
ii. Sometimes, the wireless security mode of the Tenda device is not compatible with your
wireless device. You may need to disable the wireless security. This is especially true for older
devices and Windows Vista computers.
Note: You can secure your Wi-Fi with Access Control once the security mode is disabled.
Manually assign a proper IP address for your wireless device, which must be within the same
range of the router's IP address. For example, if the IP address of the Tenda device is
192.168.0.1, you can set a static IP address ranging from 192.168.0.2 to 192.168.0.254 for your
wireless device, set the subnet mask to be 255.255.255.0, and set the default gateway to be the IP
address of your Tenda device: 192.168.0.1.
An unstable and slow wifi may simply caused by overloading, you can power cycle the Tenda
device, your computer and your modem if any
Step 1:
Unplug the power adapter from your modem first, then the Tenda device. Shut down your
computer.
Step 2:
Power on the modem first, then the Tenda device, wait for its lights on, and then turn on the
computer.
To get a stable wireless connection, you’d better disable the power saving feature of the wireless
adapter.
Here we take a Windows 7 computer for example.
Step 1:
Right click on Computer, select Properties, and then click Device Manager.
To Next Page
Loading...
Need help?
General
